I am new here and read through the awesome article on here about modding a rapidstrike. I have recently gotten back into nerf which I used to love as a kid now being 27yrs old and have 2 daughters I recently got back into it and am finding it more fun as an adult! I recently acquired a awesome deal on a bunch of used blasters and decided to mod at least one and see how it goes. I have a rapid strike that I removed the jam door switch and the mag switch from. I just recently found the dart zone article that goes into detail on how to rewire with heavier wire, and a heavier switch utilizing the stock motors. I would like to do this but see two issues. One being I love the modded gun for speed and power but sometimes I would like to dial it back for when playing inside with the kids vs outside at extended ranges. My thought was maybe utilize all the mods he does minus the lipo and see where I am with the stock c batteries but I am not sure if I want to go through all that work and have it slightly better vs awesome running a lipo. So my next thought was ask on here if anyone has ever added almost a selector switch that when flipped into one position used a resistor to knock down current to the blaster and reduce some of the performance so you could slide the rocker to one position and have a resistor wired in with the battery voltage to knock down your voltage and current some to slow down the motors. If so would someone point me in the right direction or if anyone knows what size resistor I would need to accomplish near stock performance with those mods I would appreciate it.