So i installed an OMW stage one kit into my Longshot a while back and I noticed the performance differed from what I've heard about the kit. So I Chronographed it on my friends chrono and it was only hitting around 65-70 fps. Is this normal for the kit? I also increased the seal with electrical tape, but I should probably use tephlon tape. I also think the plunger should be re-lubricated. Or is the 70ish FPS normal? Thanks.
Orange mod works Longshot kit failure
Started by Arctic Hunter, May 31 2018 02:48 PM
3 replies to this topic
#2
blitz
-
- Members
- 285 posts
Member
Posted 31 May 2018 - 04:43 PM
I'm guessing you didn't remove the air restrictor, so you should definitely do that. Also should relube if you haven't already.
Guide here: http://modworks.blog...-mod-guide.html
AR removed LSes should top out at ~100fps.
Blitz, member of the FNBS
"sexual innuendo no intendo"
"sexual innuendo no intendo"
#3
Arctic Hunter
-
- Members
- 39 posts
Member
Posted 31 May 2018 - 04:45 PM
I forgot to mention that I did remove the air restrictor. My bad. I probably do just need to re lubricate it. Thanks
#4
Arctic Hunter
-
- Members
- 39 posts
Member
Posted 01 June 2018 - 12:55 PM
Thanks! So I opened it, and the electrical tape i used on it had fallen off and seemed to be caught in the plunger head. So I replaced it with Teflon tape and re lubricated it, and it seems to be firing better now. I guess I should have just maintaneced it before posting this. Lol
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
