4 replies to this topic

[Electronic Leopard]

I've been working on this project, it being my second flywheel project ever. Phase 1 is completed. Phase 2 will be explained once it's done. Phase 1 is just simple basics.

Here is a mod list, for phase 1. Keep in mine this is just phase 1, much more impressive stuff to come.

1. Neo rhino motors to give it that virtually nonexistant spin up.
2. Voltmeter hidden under the jam door
3. Rewired to LiPo with 16AWG wire
4. That LiPo is a Turnigy Graphene 1500mAh 65C 3S
5. Custom battery tray made from a toolbox. Doubles the width, but it's massive.
6. MOSFET'd rev trigger
7. Kill switch
   
   
   
   
   

Edited by Electronic Leopard, 17 April 2018 - 11:02 AM.

[Elithenerficorn]

Sorry, but Simply listing the mods you did with no pictures isn’t that helpful. The purpose of a mod guide/writeup is to explain what you did so other people can replicate it. I for one want to see how you did that battery tray, as well as just a picture of what it looks like. If you don’t have the time to make a full writeup, that’s okay, but maybe just post the mod list with a picture in the mod pictures thread
Done bitching.

This sounds cool, can’t wait for phase 2

[Electronic Leopard]

Sorry, but Simply listing the mods you did with no pictures isn’t that helpful. The purpose of a mod guide/writeup is to explain what you did so other people can replicate it. I for one want to see how you did that battery tray, as well as just a picture of what it looks like. If you don’t have the time to make a full writeup, that’s okay, but maybe just post the mod list with a picture in the mod pictures thread
Done bitching.

This sounds cool, can’t wait for phase 2

i couldn't take pictures at the time i was writing it. i'll add some to it.

[Elithenerficorn]

Thanks for adding pictures, that’s really cool how you did the battery tray. Is that a painted Rayven, or is that a Rayven fire

[Electronic Leopard]

Thanks for adding pictures, that’s really cool how you did the battery tray. Is that a painted Rayven, or is that a Rayven fire

just a fire. i don't paint until i completely finish my projects because that way i don't have to repaint every time i cut the shell.