#1
Posted 23 August 2004 - 02:32 PM
"NERFITIZE ME CAPTIAN!!!"
#2
Posted 23 August 2004 - 02:35 PM
~ompa
#3
Posted 23 August 2004 - 03:15 PM
1: i "modded" my scout by drilling a hole so all the x pegs and air restrictor crap is out
2: i made one of the holes that fit the screw bigger so i can get it out.
i think im just ganna get Drano to help me fix it, because i really dont know what to do.
"NERFITIZE ME CAPTIAN!!!"
#4
Posted 23 August 2004 - 05:12 PM
although the problem is valid enough to notify everyone of it, you do a crappy job of describing it.
... IT WAS FINE WHEN I SAW IT YESTERDAY!!! WHAT DID YOU DO ?!!
Edited by Drano, 23 August 2004 - 05:15 PM.
#5
Posted 23 August 2004 - 05:26 PM
#6
Posted 23 August 2004 - 09:46 PM
#7
Posted 23 August 2004 - 10:46 PM
~ompa
#8
Posted 24 August 2004 - 12:11 AM
#9
Posted 24 August 2004 - 06:10 PM
#10
Posted 25 August 2004 - 09:02 AM
I have a similar problem with my 6th barell. It wont fire the air at all. Then, about 3 trigger pulls later, the dart unexpectedly shoots out. Inbetween the 3rd and 4th barell, there is a trigger pull where nothing happens, but I can definitely hear air being shot out of one of the empty barells. I think that my hornet has enough air for seven shots but it has a hard time distributing it, like maybe I'm not pulling the trigger far enough in. That's another thing...the trigger pull is VERY long. This is when I haven't plugged the pump.Gah I'm pissed as hell as well. My 5th barrel isn't firing all the air- I suspect there's a leak in the airtank/hose... It looks like I'm going to finally need to get some plumber's goop. Damnit, such a good gun... But still, I might end up using my AT3k as my primary it seems- It's just more accurate.
~ompa
-i hate the yankees as much as the next guy, but i'm only sixteen and i'm not ready for the ice age, or the apocalypse...whichever the great bambino has destined for us. -Rawray7
#11
Posted 25 August 2004 - 11:17 PM
LOL cerealkiller.. pretty smart of you to do that... THEY ARENT PERFECT YOU KNOW even machines make mistakes, or do the people assemble it..whatever... ok just as a safety precaution(cuz i know u and all) CHECK IF THE GUNS ARE DEFECTIVE BEFORE TAMPERING WITH IT!!when i was pumping up the hornet, it made this really loud leaky sound, like pisssssss, so i was like OH Crap! So then i opened it up and found out it was leaking from the middle barrel, the one on the right when you are shooting someone. On the barrel the manufactures marked a what seems like a 4. i also found out that my lower barrels, also one on the right, has this wet stuff in the pipes connecting to the airtank. My hornet leaks so much that even when i shoot it right away the darts only go 2 feet. I know i didnt blast the tank, because i didnt plug up the pump yet.
GENE-IOUS!!
#12
Posted 26 August 2004 - 12:19 PM
Edited by LiKnSmAkScOmIn!, 26 August 2004 - 12:20 PM.
#13
Posted 26 August 2004 - 12:30 PM
Honestly, do you consider that communication? Does it make you proud to know that hundreds of people will read that and form an opinion of you based on it?LOL cerealkiller.. pretty smart of you to do that... THEY ARENT PERFECT YOU KNOW even machines make mistakes, or do the people assemble it..whatever... ok just as a safety precaution(cuz i know u and all) CHECK IF THE GUNS ARE DEFECTIVE BEFORE TAMPERING WITH IT!!
GENE-IOUS!!
#14
Posted 26 August 2004 - 12:42 PM
~ompa
Edited by ompa, 26 August 2004 - 12:49 PM.
#15
Posted 26 August 2004 - 01:34 PM
My suggestion? Oil, pressurize, pray. Sorry to hear another casualty of chance; best of luck with the Hornets.
Welcome to the forum Joselyn. Good sig reference.
- Death
#16
Posted 26 August 2004 - 01:42 PM
~ompa
#17
Posted 26 August 2004 - 02:43 PM
I've been using Canola Oil like a hippie for the past bit, though I'm sure there are better oils out there. Remember, we only have to deal with evaporation: No extreme temperatures or pressures here.
- Death
#18
Posted 26 August 2004 - 02:45 PM
~ompa
#19
Posted 26 August 2004 - 02:47 PM
THIRST
Or, ya know, be a hippy.
#20
Posted 27 August 2004 - 12:30 AM
Hrm... so that's how a ss2's tank works on the inside. I always figured it used levers and a tank ressembling the 5k's. Perhaps I should have opened one from the stack I was sitting on a while back.*The form of valve used in the Hornet (and the Blastfire, Triple-strike, and Secret Strike Pocket Blaster) seems really prone to errors... Sum up all the problems with the aforementioned guns, and you have the many failure modes of this valve (if the link doesn't work properly, my apologies; I can't view my site from Canada anymore. Blasted Web1000). Really exact builds required. My prototype facsimiles experience the same problems. Very annoying.
My suggestion? Oil, pressurize, pray. Sorry to hear another casualty of chance; best of luck with the Hornets.
Welcome to the forum Joselyn. Good sig reference.
Ooh! Airsoft knowledge applied to nerf! Don't want to revolutionize the nerf biz, but we should REALLY be using silicone petroleum free lubricant. Seeing as petroleum based products wear down rubber and latex parts something awful, they may temporarily seal a gap, but will eventually deform or make it crack. My Crossbow's plunger was a prime example, god that thing looked nasty until I finally had to replace it.
Where do you get silicone lubricant? Go to a rc hobby store and pick up a little bottle of lubricant. Remember, the higher the weight the thicker it is.
Why not use aqua-lube, KY, or some other more readily available lubricantt? Well besides admitting to yourself the intended purpose of said lubricants, they are a bit too thin compared to the high weight silicone lubricants. Plus, do you really want your air tank to "sensually heat up"?
As for my Hornet, no problems yet, but seeing as the outbreak of trouble, I wouldn't be suprised if mine ended up broken.
Murphy MacManus: There were nine of them, you retard! What were you going to do with the last three, laugh them to death? Funny man?
-brothers Macmanus, Boondock Saints
#21
Posted 27 August 2004 - 12:49 AM
And personally i am not offended by other people's remarks about me.... but ok im cool with that
But if you say something about me i will drown in my own tears
#22
Posted 31 August 2004 - 01:02 AM
........... dont listen to this nub. He's like me and doesn't really know how nerf guns really work, and i might add i know more than him. This guy is just trying to frame me by putting my website up on his info and using my namelol cxwq.. i dunno people will believe me, they might not.. i know cerealkiller personally, and i know how "genius" he gets at times.. sometimes he thinks, sometimes he dosen't
And personally i am not offended by other people's remarks about me.... but ok im cool with that
But if you say something about me i will drown in my own tears
"NERFITIZE ME CAPTIAN!!!"
#23
Posted 31 August 2004 - 10:04 AM
#24
Posted 31 August 2004 - 01:23 PM
so.
that link that zero talent posted was a good read, does anyone know for sure if thats how that valve works? i havent been able to find anything better in explaining how that valve works. i mean, im sold on that theory, but mabey someone could call up the NERF engineering department and confirm it.
#25
Posted 31 August 2004 - 04:13 PM
Zero's description is both detailed and accurate.does anyone know for sure if thats how that valve works?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users