7 replies to this topic

[jpshyboi9]

OK, so I was modding my nf with pvc and stuff. All I did was put about 6 inches off pvc in it and cut off the front part like where 3DBBQ did with the M4 versioon. Now the fuckin gun wont go 5 feet. I put about 10 bands on it and then with 11 I couldnt pull it back!!!!!


PLEASE HEP ME!!!!!!!!!!!

[ompa]

Maybe you shot the plunger cap off. Open it up and check that first.

~ompa

Edited by ompa, 23 August 2004 - 01:58 PM.

[Grinch]

Maybe you just suck at modding.

There's so many things to consider...bad seal, bad barrel length, you just don't have 1337 m0dD1nG 5k1lLz, friend.

[Viper]

sounds like a bad seal, either with the plunger cap or the barrel-to-plunger assembly. If you're going to fuck up a gun, it might as well be 5.99 gun Either show pictures or be very specific with your description or otherwise its hard for us to tell you what to do.

Edited by Viper, 23 August 2004 - 03:41 PM.

[jpshyboi9]

Ok I opened 'er up and found that my barrle was fucked up. The plumbers goop had broke the seal ..not to mention the barrle was only 4 inches after all. So ima put a new barrle on it and see what happens. I'll post pics if I can.

[nerfspecialforces]

If that doesn't work, then take it apart, take apart the barrel assembly. There's a cap near the air restrictor. Turn it around.

[Vintage]

You used PVC so it could shoot the micros it came with, right? I would glue a Crayola barrel into the PVC. It will make it shoot much harder than PVC alone.

~Vintage

[jpshyboi9]

Wala!!!! TRY TO GET A RIFLED PVC BARREL!!!!!!!!!
Oh and as soon as I can find a crayola barrel I'll rifle it too and shove it down there.

Edit: I'll have pics up maybe tomorrow if I feel good enough to do it from school.

Edited by jpshyboi9, 23 August 2004 - 07:43 PM.