2 replies to this topic

[An unnamed cell]

I'm not sure if this warrants an entire topic, but I found some blasters that have been somewhat heavily discounted that haven't really been fully taken advantage of by this community yet.

 

First off, the Boomco Halo Assault Rifle in Blue (looks better than in Red), is about half off. Grabbed myself one of these a couple weeks ago when it was a similar price. The package arrived in a huge box that wasn't properly sealed, but the item was still in new condition.

 

Link

 

Second, the Buzz Bee/Advenure Force Eradicator, basically a Retaliator with a shorter stock and longer barrel extension. What makes this good is that it's only $8, comes with 3 (as far as I know) Nerf compatible 10 round magazines, and 30 or so darts. From what I've seen, anything under the Adventure Force name on Amazon is usually super expensive, so this is a pleasant surprise.

 

After a quick Google search, I couldn't even find pictures of the internals for this blaster, let alone any mods; so I picked one up. Haven't figured out what I'm going to do with it yet. Expect photos of guts in near future.

 

EDIT: No longer $8 Nevermind

Link

 

I have no idea how long these discounts last, just wanted to spread the word. Sorry if this is old news.

 

EDIT: feels like there should be a designated topic for discounted items. 

Edited by An unnamed cell, 30 January 2018 - 10:24 PM.

[Meaker VI]

There used to be a designated sale topic, but it stopped being useful - it was so cluttered and nobody checked it because usually the last few posts were irrelevant. Reddit better serves the purpose - posts there bury themselves once they are no longer needed, never to be seen again.

[tt004ucr]

Encountered some difficulties on opening this blaster.

 

I bought 4 of these, although they don't ship to SoCal from Amazon. Got around that by buying it through their eBay store.

 

I've managed to crack the Eradicator open with a saw. A dremel or hot blade could work just as well for the threaded end of the barrel that is glued to the shell of the blaster.

 

 

 

Line up the cut as well as possible to the gap between both halves of the shell. 

 

 

There is blue cover on the handle that hides two screws. There are notches that hold it in place. Use a screwdriver to pry that off. 

 

Remove all the screws and there you go.