2 replies to this topic

[alpha99025]

Im doing a build and I want 3s 132 motors, I was originally going to get fangs but then I saw the Titan hyperion-X motors (red ones) and was wondering which one would be better,maybe w/ hooligan wheels and a morphwus cage. Also what would be a good 3s that fits in a stryfe w/ a BSUK 20mm tray expander.
-Thanks

Edited by alpha99025, 24 December 2017 - 05:31 AM.

[IAmAPenguin]

I would recommend going with Fangs as they have better overall specs than the hyperion-X's, which are more of a budget solution for 132 motor upgrades. As for what LiPo to use, you have a few different options but i'll Just point out two that i know work extremely well.
You could go with a standard Turnigy 1000mAh 3s 30C pack for just 14AUD at HobbyKing or if your willing to spend abit more, you could upgrade to a Turnigy 1000mAh 3s 65c pack for 23AUD at HobbyKing. The graphene pack will get you slightly higher power density, allowing for a longer battery life over a standard pack as well as a much higher Discharge-current. Which ever one you choose just keep in mind that you will have to make some fairly major modifications to the stryfe battery tray to get your LiPo to fit.

[Meaker VI]

You could go with a standard Turnigy 1000mAh 3s 30C pack for just 14AUD at HobbyKing or if your willing to spend abit more, you could upgrade to a Turnigy 1000mAh 3s 65c pack for 23AUD at HobbyKing.

 

Your Ah * C needs to exceed the stall rating of the motors (in this case, 52A total) for safety. You shouldn't use a 30C pack unless you pick up a minimum 1800 mAh pack.