So, I met a friend who is a wizard with electronics and I brought him to a war. Long story short he fell in love with the rayven and because I pretty much gave him a laptop he offered to provide materials for my blaster and assist with modding it. So far we have the Picaxe In the stock controlling the display and we will soon have it controlling brushless motors reading motor rpm, fps (using ir beams in the barrel), battery life, ammo counter( haven't decided to use reed switches, physical switches or a color system using lights and darks to tell magazine size), and really anything else I can think off because we have a massive amount of headroom with the electronics but not too much in the physical sense. we might remedy that by buying a 3d printer and extending the stock (if we do that then well make it full auto too with fire mode selector) were gonna need a 3d printer regardless to print the cage for the brushless outrunners (probably going to be turnigy 2627 3800kv motors) Were gonna use these motors because there is already an open source rapid strike cage that we should be able to modify to the rayven. If you have any suggestions or questions please comment or inquire. (sorry mods if you see this as a thread that needed to be put in modification and paintjob pictures) and needs to be put in the sharing thread I see it as more of a request for experience and to help others trying to do something similar)
now for the pictures 
Edited by Shadowslayer1924, 27 October 2017 - 12:30 PM.
