2 replies to this topic

[Bio-bob]

So the other day I descided to mod my Vulcan. I bypassed the electrical locks and replaced everything with 16 gauge wire and put in a 3S lithium battery tray running on three EBLs and I also put in a micro switch behind the trigger. I then opened up the gearbox taking out the air restrictor and Keeping the stock spring and threading on a old maverick spring Ito the stock one. Also I glued the clutch together and I put silicone grease around the seal that goes over the belt. then when I went to fire it only 10 darts came out of the whole 25 dart belt. Does any one know what the problem may be?

Edited by Bio-bob, 17 August 2017 - 08:43 PM.

[Eightdotno]

So the other day I descided to mod my Vulcan. I bypassed the electrical locks and replaced everything with 16 gauge wire and put in a 3S lithium battery tray running on three EBLs and I also put in a micro switch behind the trigger. I then opened up the gearbox taking out the air restrictor and Keeping the stock spring and threading on a old maverick spring Ito the stock one. Also I glued the clutch together and I put silicone grease around the seal that goes over the belt. then when I went to fire it only 10 darts came out of the whole 25 dart belt. Does any one know what the problem may be?

There are 3 notable problems you may be experiencing,
1. Youe vulcan may be pushing out as much air as it needs to fire your darts, putting a maverick spring around the stock spring may be the problem, it could be that it's not letting your vulcan not get sufficient compression, try taking out the maverick spring and see if that works.
2. Youe darts are too loose, the problem may not be with the vulcan, but your with your darts, what kind of darts are you using?
3. Your belt may not be getting a good enough seal around the plunger tube, you can test this by firing your vulcan, and looking at the belt feed while it's firing, if the plunger tube does not seal up with the end of the belt, that's the problem.

[Bio-bob]

I will take out the maverick spring and see if that makes a difference. The darts I was testing it with was some knock off darts of some kind and regular nerf darts. Also the piece that goes over the belt each shot lines up good. Like said I'll take out the spring and see how it works