2 replies to this topic

[aydensnake]

Can anyone tell me if all of this is good for a Zeus rewire, my Zeus is full auto but is still electronically stock. I can't find a good charger too so if anyone can link a good LiPo charger that would be amazing

 

Wire. https://hobbyking.com/en_us/catalog/category/view/s/16awg/id/6833

 

LiPo. https://hobbyking.com/en_us/zippy-compact-2200mah-3s-60c-lipo-pack.html

 

Connector. https://hobbyking.com/en_us/nylon-xt60-connectors-male-female-5-pairs-genuine.html

 

Microswitch. https://www.onlinecomponents.com/omron-electronics-v2141c6.html?p=12057830

 

Charger. Haven't found a good one yet

 

[shandsgator8]

The wires will be fine. You'd be ok if you went to 18awg, although if you have the room in the Zeus, it can't hurt to use the thicker 16awg wire.

[SirBrass]

I just did a Zeus rewire recently and 16awg worked fine. The right side channel that used to house the magazine lock is wide enough for 16awg with no issues.