Hi,
I was thinking of integrating my hyper fire into my stampede but i was wondering if anyone has done this before. Any help would be appreciated.
Posted 03 April 2017 - 01:29 PM
Hi,
I was thinking of integrating my hyper fire into my stampede but i was wondering if anyone has done this before. Any help would be appreciated.
Posted 03 April 2017 - 06:33 PM
Posted 03 April 2017 - 07:17 PM
Ive been thinking about this for quite some time, but i dont have the stampede to make it.
Co-Owner of the History of Nerf Modding research project, moderator of r/Nerf, owner of BlasterWiki, maker of 3d printed blasters (GitHub/Thingi) and Nerfy art.
Posted 03 April 2017 - 11:18 PM
Posted 04 April 2017 - 03:26 PM
My idea is the front of the hyperfire and the stampede grip/stock area. The stampede i have is just scrap as i destroyed its motor and lost a gear. I will plan some more and draw up a diagram and will let you guys know on my process. Do you think i could still use the stampede battery tray? Im not going to be replacing motors or using lipos just stock batteries.
both shells have been painted previously but i dont think that should be a problem since im repainting anyways.
Posted 05 April 2017 - 01:45 PM
I just ordered some supplies and made cuts to the shell. i will post pics later of the cuts i made. I had extra money so i thought i would do a motor replacement. Would hobbyzone 180 brushed motors work well in the hyperfire? Also what is a good 2s lipo for the hyperfire?
Posted 05 April 2017 - 10:46 PM
Edited by JospehSquared, 05 April 2017 - 10:47 PM.
Posted 06 April 2017 - 12:53 AM
I will be using the 180 motors and i dont mind shell work. So would a 2s or 3s be good for 180s? I also just thought about the feeding mech which probably could not withstand a 3s so im guessing a 2s.
Posted 06 April 2017 - 07:33 AM
Posted 06 April 2017 - 08:44 AM
Posted 06 April 2017 - 10:54 AM
Amazon Link: https://www.amazon.c...t/dp/B00745ZZNQ
Okay Thanks everyone for the advice! Im kind of noob at flywheel nerf blaster mods. Also, Does the hyperfire have the same flywheels as say a stryfe or a rapid red? Would worker flywheels work for it?
Posted 06 April 2017 - 02:22 PM
Posted 06 April 2017 - 03:13 PM
Ok i will read them and see. I will post a picture of one side of the finished shell today. Also i will check out those 130 rhinos. Will keep you guys updated.
it says fk180 3245. Is that ok?
Posted 06 April 2017 - 06:21 PM
Posted 07 April 2017 - 01:14 AM
Posted 07 April 2017 - 06:41 AM
Posted 07 April 2017 - 10:06 AM
Ok makes sense now. i will look for one and let you guys now later
Posted 07 April 2017 - 11:04 AM
Edited by Eightdotno, 07 April 2017 - 11:09 AM.
Posted 07 April 2017 - 01:39 PM
what type of underbarrel would be ideal? Do you have reccomendations? i have several doomlands pesuaders avalible also a double strike.
Posted 07 April 2017 - 01:56 PM
Posted 07 April 2017 - 04:12 PM
Posted 07 April 2017 - 05:43 PM
Or i also have a switch shot which i think would do a great job. I have modified it so you dont have to have the main blaster part.
0 members, 1 guests, 0 anonymous users