This is my Gutenberged Crossbow project, "The Morrigan", as she is right now.
Test fitting results: Plunger Tube spacers need to be scaled up, spring rest slot needs to be expanded, ridge under plunger rod needs to be ground down, and catch needs sanding.
Additional work: Expanded spacers, designed plunger head prototype, printed plunger head pieces, trigger, and spacers in transparent green.
Next: Pick up print, acquire the rubber piece for the skirt seal.
The STLs I'm using for this iteration. (I might add some in later iterations.)
Catch02.stl 235.82KB 67 downloads
Trigger02.stl 255.45KB 74 downloads
Priming Handle.stl 30.36KB 74 downloads
Spring Rest v2.stl 1.45KB 64 downloads
Skirt Seal Outer V1.stl 33.97KB 63 downloads
Skirt Seal Inner V2.stl 35.92KB 62 downloads
Plunger Tube Spacer v3.stl 20.2KB 70 downloads
Plunger head pieces, spring rest, and plunger tube spacers are reverse engineered from pictures of ModMan internals.
Catch, trigger, and plunger rod are modified from Captain Slug's scans of the Crossbow.
Edited by Maniacal Coyote, 26 March 2017 - 10:40 PM.