6 replies to this topic

[Trashmouse]

Hello everybody

 

I've been looking for a decent homemade style primary that isn't an actual homemade (very counter intuetive) and my eyes have landed upon the ERTL PAS. While digging around posts involving the ERTL PAS I found out that you can put a longshot+BBB+stock spring combo inside this thing and you'll get plenty of power (hopper-able). My only problem is that i don't have a Longshot. So i thought i could buy this http://www.orangemod...t_p/spg-ls2.htm spring and forget about the BBB spring. I'm also wondering if i need to de some reinforcements (I.E. homemade PH, Venom kit, slug trigger) to the blaster.

 

Thanks in advance

[CaptainSlug]

You can fit whatever spring will go in the plunger tube and still allow the plunger to prime. Mine has a cut-down K25 in it. The only annoyance there is that you have to twist-feed it onto the plunger.

 

Replacing or reinforcing the trigger is a must, and I highly recommend that you pad the plunger head.

 

Some of the screw posts near the end of my plunger tube stripped out, especially the one above it. I drilled all the way through the shell and just used a long screw and lock nut instead. I found it useful to the do the same thing with the pump grip as well.

[Trashmouse]

Thanks for the information Slug

[Maniacal Coyote]

Bad idea. Reinforce it, then put the NerfTurf 26kg set in alongside a section of K14.

 

USER WAS WARNED FOR THIS POST: This type of post is getting old. Cut it out already.

 

-Captain Slug

Edited by CaptainSlug, 23 February 2017 - 10:15 AM.

[jwasko]

 

Replacing or reinforcing the trigger is a must

 

If you can't do it yourself

Edited by jwasko, 23 February 2017 - 09:23 AM.

[blitz]

Bad idea. Reinforce it, then put the NerfTurf 26kg set in alongside a section of K14.

 

Stop. I doubt you have experience with either. 

[Trashmouse]

Thanks for all the help everybody! I think I'll just be getting a stronger springfrom orange modworks or Nerfturf (I'll look into it some more), make or buy a slug trigger , reinforce and pad the plunger head and fix some of the screws.