Jump to content


Photo

Hammershot vs Strongarm/Maverick


16 replies to this topic

Poll: Hammershot vs Strongarm/Maverick

Which blaster, Strongarm/Maverick or Hammershot?

You cannot see the results of the poll until you have voted. Please login and cast your vote to see the results of this poll.

Why do you like that one better?

You cannot see the results of the poll until you have voted. Please login and cast your vote to see the results of this poll.
Vote Guests cannot vote

#1 Montymarks

Montymarks

    Member

  • Members
  • 100 posts

Posted 12 December 2016 - 10:19 AM

Just a quick test, I guess, on a few things

 

-Montymarks


Edited by Montymarks, 30 December 2016 - 10:25 AM.

  • 0

sorry for how I was a year ago


#2 Silly

Silly

    Member

  • Members
  • 244 posts

Posted 12 December 2016 - 11:54 AM

Can you add "comfort" to the poll? I love the strongarm handle.
  • 0

Co-Owner of the History of Nerf Modding research project, moderator of r/Nerf, owner of BlasterWiki, maker of 3d printed blasters (GitHub/Thingi) and Nerfy art.


#3 Maniacal Coyote

Maniacal Coyote

    On Increasingly Thin Ice

  • Members
  • 358 posts

Posted 12 December 2016 - 12:48 PM

My "Because of capacity" has the condition: with an easily available kit.


  • 0

I know how to help you because I have broken every rule in the book.


#4 Meaker VI

Meaker VI

    Member

  • Moderators
  • 1,192 posts

Posted 12 December 2016 - 12:55 PM

My "Because of capacity" has the condition: with an easily available kit.

 

Yeah, the Strongarm/Mav actually have *less* capacity than my hammershot. I suppose I could print up a larger cylinder for either since the one they start with is larger than the Hammershot, but the Hammershot has more options already readily available.


  • 0

#5 Zack the Mack

Zack the Mack

    Member

  • Members
  • 360 posts

Posted 13 December 2016 - 02:19 AM

Voted Hammershot, but Maverick wins because you can play Russian Roulette.


  • 0
Ask me questions about electronics, Arduino, and 3D printing

#6 ComradeSch

ComradeSch

    Member

  • Members
  • 96 posts

Posted 20 December 2016 - 07:06 PM

Generally if you're in a situation where your sidearm has to be drawn, something's wrong with your primary, which likely fires much faster than your sidearm. With a secondary, you will also likely miss, so you'd need to fire several darts to make sure you hit your target. And you don't have that fire rate for a Hammershot. I can 3D print a 9-shot cylinder for a Strongarm and fire off those 9 darts at the same fire rate as a Hyperfire, but if I'd choose a sidearm, I'd go for a Rough Cut (same reasoning) or I'd simply spray them with a Magstrike.


  • 0

Moar dakka iz best dakka ya gitz.


#7 Montymarks

Montymarks

    Member

  • Members
  • 100 posts

Posted 24 December 2016 - 10:54 AM

Whaaaaaat...

Man, I didn't expect anyone would even look at this post...

Wow...

 

Can you add "comfort" to the poll? I love the strongarm handle.

On it!

 

Voted Hammershot, but Maverick wins because you can play Russian Roulette.

No, you play Russian Roulette with a Stryfe

 

-Montymarks


  • 0

sorry for how I was a year ago


#8 Skeetz

Skeetz

    Member

  • Members
  • 11 posts

Posted 29 December 2016 - 01:32 PM

What about slam fire?
  • 0

#9 Montymarks

Montymarks

    Member

  • Members
  • 100 posts

Posted 30 December 2016 - 10:27 AM

What about slam fire?

Added!

 

-Montymarks


  • 0

sorry for how I was a year ago


#10 Johnny Mac

Johnny Mac

    Member

  • FNG-FB 
  • 1 posts

Posted 19 February 2017 - 02:47 AM

I just find the strongarm to be less durable than the hammershot. I constantly repair my strongarms,where my hammershot is old reliable.


  • 0

#11 SirBrass

SirBrass

    Member

  • Members
  • 74 posts

Posted 24 February 2017 - 11:54 AM

I love my hammershot. So easy to mod to increase capacity, and "dat one hand prime yo!"

It's a great blaster and I wouldn't like having to 2 hand prime a secondary like the strongarm/disruptor.
  • 0

#12 EricTzH

EricTzH

    Member

  • Members
  • 19 posts

Posted 17 May 2017 - 09:30 PM

It depends on what you need, a primary(semi primary?) or a sidearm. I own both, and I will vote Hammershot because it looks cooler and I've just painted mine few weeks ago.

However, I know that my Hammershot might be in disadvantage while "1 vs 1" with another person with Strongarm, because it doesn't have slam fire mode. But, I'm just using it as a sidearm, not primary, so I need its' ease of single hand prime, and tacticool looks on my waist.

p/s i recommend the new distruptor over strongarm, it is much more easy to reload darts as you don't need to press the button and push the wheel out.

Edited by EricTzH, 17 May 2017 - 09:34 PM.

  • 0

#13 Eightdotno

Eightdotno

    Member

  • Members
  • 87 posts

Posted 17 May 2017 - 10:01 PM

The hammershot is more of an HVZ geared blaster, while the strongarm is more geared twords normal wars because of its ability to have its cylinder be removable, it's slam fire, and its slamfire.
While the hammershot has a more steady fire rate, (and of corse) it's one hand prime, and it not having slamfire, which is good for hvz as you don't want to spam all your darts at one zombie.
I also think the hammer shot is an incredibly uncomfortable blaster with a low capacity.
Only because I hate the hammershots handle, I use a double strike instead of that.
Also it's smaller.

Edited by Eightdotno, 17 May 2017 - 10:04 PM.

  • 0

#14 Bubba Longshot

Bubba Longshot

    Member

  • Members
  • 191 posts

Posted 17 May 2017 - 10:23 PM

Honestly, all three are bad. The strongarm has slamfire and all, but mine broke easily leaving me very salty. The foam seal between the plunger and the cylinder fell during a war, and I was unable to fix it. I had to end up scrapping it... The Maverick is much better in terms of build quality, but the pathetic reverse plunger gets poor ranges. The Hammershot is cool and all, but I really don't like one hand prime blasters, and the cylinder makes it somewhat front heavy after a long battle.
Solution: Use a longshot and carry extra mags so a secondary is not necessary. 
Just kidding of course, I voted strongarm/maverick. 
P.S all of this was my opinion, feel free to disagree

Edited by Bubba Longshot, 18 May 2017 - 05:03 PM.

  • -1
"The only thing that sucks about Nerf modification is the anxiety that something will break... That's why we reinforce a whole lot!" -Me

#15 Speedr117

Speedr117

    Member

  • Members
  • 57 posts

Posted 18 May 2017 - 06:52 AM

These both are what I see as sidearms, not secondary's. Secondary's for a rapidstrike should be something like a titan so you can take out shields, Or a sledgefire with both shotgun and s n i p e r shells. Rough cuts are also good. But if you want a stryfe, something like a rapidpistol or other full auto would compliment it. You want your secondary to be used in certain situations where it would be smarter to use.
Sidearms are used when you are reloading, jammed, or your primary is otherwise temporary disabled. It should be something you can draw and fire while pinned down. You probably don't need any other shots beside 1-2 we'll placed shots on a hammershot. If you had a strong arm you would take advantage of slamfire, and miss most you shots making you need to reload while your primary also needs to. Never a good idea to be defenseless.
Th point strongam people are making is that what happens if your primary goes down. First off this should never happen. But if say you have a stryfe. And a motor gets unsoldered, you need something for both the round, and the rest of the day. The round can be won with anything, I've seen triads beat strayvens, and whether you have a hammershot or a strong arm doesn't matter because it all depends on your skill.
Finally I picked hammershot. My first reason was better capacity. With 8 and 9 shot aftermarket cylinders and even a drop cylinder mod. Secondly, the most heavily modded strongarm has a 5kg spring, OMW unleashed solid kit, and drop cylinder. Even that will break in days. Hammershots can have Handel scales-wrap, better hammer and trigger, high cap cylinders, spring upgrades, body kits, and now drop cylinder mods. Also having less fire rate is good since it makes you aim, but the hammershot also can be fanned with a better hammer.

Edited by Speedr117, 18 May 2017 - 06:53 AM.

  • 0

#16 Silly

Silly

    Member

  • Members
  • 244 posts

Posted 18 May 2017 - 07:13 AM

Who needs a secondary when you have a full poweclip DX in a holster. If you have a sensitive enough trigger finger, you can do 3-4 round bursts, and if you wanted to, you can mape it rain darts in a pinch.

Edited by Silly, 18 May 2017 - 07:34 AM.

  • 0

Co-Owner of the History of Nerf Modding research project, moderator of r/Nerf, owner of BlasterWiki, maker of 3d printed blasters (GitHub/Thingi) and Nerfy art.


#17 mykeypowell

mykeypowell

    Member

  • Members
  • 45 posts

Posted 18 May 2017 - 07:42 PM

MAVERICKS FOREVER


  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users