12 replies to this topic

[NerfBeginner16]

Hi im a serious noob for modding. Im looking for the easiest and best mod for a flywheel and one that does not catch my gun on fire. Also I have never modded a flywheel before accept for lock removal so I will need an easy one please tell me the mod give me the easy guide and tell me the blaster to buy if you can. THANKS!!!

 

[JospehSquared]

I'm pretty new to modding and I just finished modding a styrfe. 

I used these motors off normal alkaline batteries https://www.pololu.com/product/611. 

i used 18 gauge wire from radio shack and followed a basic tutorial on youtube.

It shoots pretty fast and hard (did not chrono it) and it was really simple to do as my first mod.

[NerfBeginner16]

Is there a tutorial and video on the entire mod you did?

[The2ndBluesBro]

Don't do it that way, RM2's suck. Use MTB Rhino motors if you don't want to cut the shell or MTB Hellcat motors if you don't mind. 

[JospehSquared]

I work with kids so I decided to use motors that wouldn't kill a kid.

I used foamdataservices tutorial. There may be better ones but this one explain it all out nicely for me. (https://m.youtube.co...h?v=VARollLMqBY)

Edited by JospehSquared, 26 November 2016 - 01:49 AM.

[jwasko]

RM2s aren't great, and they tend to burn out (so don't hold down the rev button longer than you have to!) But if you don't think you can properly take care of a rechargeable battery pack they can give you a little better performance while still using normal AA batteries.

 

LiFe batteries are a little more stable than LiPos, but they aren't as compact and the voltage is a bit lower. For instance https://hobbyking.co...fepo4-pack.htmlor https://hobbyking.co...fepo4-pack.html

 

Charger for them: https://hobbyking.co...discharger.html

 

If you do rewire always try it with normal AA/alkaline batteries before connecting a battery pack!

Edited by jwasko, 26 November 2016 - 03:46 PM.

[CaptainSlug]

Hi im a serious noob for modding. Im looking for the easiest and best mod for a flywheel and one that does not catch my gun on fire. Also I have never modded a flywheel before accept for lock removal so I will need an easy one please tell me the mod give me the easy guide and tell me the blaster to buy if you can. THANKS!!!

 

In future be much more specific in your request. We're not here to do all introductory research for newcomers who have access to all the information that you also have access to on this forum. We have more than enough directories and mod guides that you can poke through on your own to find answers to questions like this one.

[NerfBeginner16]

But I looked at your mod guides and there still to hard for me. Im looking for a mod that I can do and the mods here even the esiest ones require drills and stuff I dont know how to use.

[Quack]

But I looked at your mod guides and there still to hard for me. Im looking for a mod that I can do and the mods here even the esiest ones require drills and stuff I dont know how to use.

Without a soldering iron (which I'm assuming is more complex than drilling), your best bet with flywheel mods is to remove all of the purely mechanical locks and lube up the trigger. I guess you could put in 2 IMR's and 2 dummy batteries, but that's about it. 

[NerfBeginner16]

I looked at the modding tools guide in the forrums it dosnt say where the best place to get a dremle and a soldering iron can someone tell me where?

[ENP10]

https://lmgtfy.com/?q=Soldering+iron

 

https://lmgtfy.com/?q=Dremel

 

Just look at up...

[Silly]

Number one: it's Dremel or Rotary tool.

Number two: home depot and Lowe's have nice S-irons and dremels. Also a magical place called Amazon.

[CaptainSlug]

I looked at the modding tools guide in the forrums it dosnt say where the best place to get a dremle and a soldering iron can someone tell me where?

If I see one more post from you demonstrating utter helplessness and an unwillingness to do any research of your own you will be suspended for at least a month.