5 replies to this topic

[fisher521]

Hi. After modifying my Retaliator, it wouldn't prime all the way back. Here is what the internals look like:



Also, I found a black ring when I opened it up. Where should it go?



Thanks for the help!

[Snoop Doggy doge]

plunger head destroyed, the o ring won't stay on so it won't work. This is because you removed the air restrictor which was unncessary IMO.
That's the black ring, 

I see you already got a stage 1 OMW kit, you may as well get stage 2 at this point

[fisher521]

plunger head destroyed, the o ring won't stay on so it won't work. This is because you removed the air restrictor which was unncessary IMO.
That's the black ring, 
I see you already got a stage 1 OMW kit, you may as well get stage 2 at this point

What should I do? I didn't really understand what you meant.
P.S. Does this white ring help?
(dart added for size comparison)

[The2ndBluesBro]

What should I do? I didn't really understand what you meant.

Your plunger head is broken. You'll need to replace it.

[Snoop Doggy doge]

there's no seal, so your blaster isn't sending air through to push the dart through.
a seal is created with that black piece, the O ring. it's not being held in place because the front of the plunger head broke. 


I have no idea what that white ring is by the way, 

[Bryansuh]

From what I see, you're screwed. No way around it. The white ring isn't going to help either. The plunger itself is fudged. I know because I screwed up my retaliator pretty much the same way when I was doing my first mod.

Also the retaliator was kinda difficult to put back together. Did anyone else have that problem first time around?