megas or micros? i modded my nf with 1/2 copper and micro are to small and megas are to big whats wrong
Fbr Trouble
Started by nerfboi, Aug 12 2004 10:06 PM
5 replies to this topic
#1
Posted 12 August 2004 - 10:06 PM
We Ride together, we die together, Bad boys for life.
#2
Posted 12 August 2004 - 10:43 PM
Copper is a very sucky barrel material. Use Cpvc or brass.
Moose
Moose
Edited by moosenukem, 12 August 2004 - 10:45 PM.
#3
Posted 13 August 2004 - 02:01 AM
You could also go with 5/8 fbr and ½ PVC, that usually works for me. It all depends on your materials though.
#4
Posted 13 August 2004 - 10:22 AM
Copper is rarely ever used because of people's FBR. It hardly ever fits it nicely. However, 9/16" K&S brass is great for 1/2" micros.
If you're foam is 5/8", 1/2" Sch. 40 PVC is your best bet.
I recommend staying away from 5/8" and just sticking with 1/2". That's just my opinion, though.
If you're foam is 5/8", 1/2" Sch. 40 PVC is your best bet.
I recommend staying away from 5/8" and just sticking with 1/2". That's just my opinion, though.
#5
Posted 13 August 2004 - 10:59 AM
Actually, I was at the hardware store, and bought 1/2" copper. This copper was very thin ID, and well, fits our darts nicely, slightly wider than cpvc. Fits similar to brass.
Tyranny Response Team
#6
Posted 13 August 2004 - 11:00 AM
Go with what works best for your darts. My FBR fit 1/2 in copper, but I highly suspect that your darts and pipe are a different size. So, grab a dart and head down to your local hardware store. Look around in the pipe section, trying as many different pipes as you can. When you find a pipe that the dart fits in nicely, buy it and use it for your barrels.
Do not mess with CXWQ, for he has Admin powers and will bann your flaming little a**.
Techno-Dann of the Seattle Tactical Nerf Team
Techno-Dann of the Seattle Tactical Nerf Team
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users