Godfuckingsamnit NH add a failsafe for closed tabs. Got my writeup closed write before fucking posting, aghhh redoing it *sigh* ahhhhgggg.
T R I G G E R E D as fuck right now, I have so much #salt.
"Alright, a pump action stock blaster that doesn't have your stupid recon/retaliator under pump this time Van!"
Well I wasn't even going to after reviewing it, (BTW notice it came up before NH is back post 
hehe) but I had some 1/4 in PVC and I noticed it was really close to fitting in the front attachment. So I decided fuck it, lets do it. I have spent more time on this writeup than I have building this.
Also, I didn't even need to open up the blaster past the top slide for this. You can do this to a stock reaper lol. Stock addition maybe. Aeromechs already bitching about it, he'll probably bitch about how I didn't countersink the screws or sand down the grip enough lol. Why am I writing this on a school night?
Yea bitch you know you want this. mmmm it'll cost ya like 30$. Photo description BELOW the photo as always.
WHAT YOU'LL NEED
STEPS
Alright so get that 1 in PVC.
Take your grinding wheel and sand about an inch in so it can fit in the front of the reaper for a bit.
Look at all that privilege that's on my arm from dremeling!
It should fit in like this and stick out.
Now cut out a channel like this an inch wide. This is for clearance of the dart tooth
Stick it in, pull the trigger and make sure the dart tooth is unaffected. The 1 in PVC should be like this, look down the barrel and pull the trigger and make sure it works.
Now drill holes on both sides, and bolt it in. Make sure the screws don't affect or touch anything inside, look down the barrel again. Make sure the front barrel is at least 7 in from the front nozzle.
Also, cut out a segment of 1-1/4 PVC that you like gripping as it'll be your pump. It goes over 1 in PVC nicely and 3 in long is a nice pump.
aight so like, get a strip of material like a foot long in a rectangle shape and than connect it from the front pump to slide. Drill, bolt together, sand down, make sure the screws are flush, yadda yadda yadda it's really simple and if you don't understand I can't help you. The arms should be like a foot long.
Screw it all together.
Boom. It's fucking good to go. Didn't even open it up entirely.
This is like the most cheap war practical mod.
Overall, it's pretty cheap and should be decently war competitive. Last war I went to, this thing stock was pretty awesome. Now it's pump action and got ROF, I can add a stock so you get a full primary because everyone "Needs a stock" for some reason. I'll test this at the next war I go to, loan it and see, I expect to see other people building this because you really only need a drill screwdriver and sandpaper for this (yea yea sanding the front is a bitch but it works) so like, really easy noob primary.
more tactical photos and review to be added later.
Edited by Snoop Doggy doge, 02 October 2016 - 11:24 PM.
