5 replies to this topic

[joseg619]

I just bought a pre-owned Deploy CS-6. When I was firing it, the first bullet would shoot but would jam and tear the 2nd one every single time. Im Fairly new to Nerfing but the little plastic piece that pulls in when prime the handle is too slow so when my dart goes in ready fire position it get smash by that little plast restricter. Please HELP!

[Montymarks]

I have no experiance with deploy modding, and considering its crappyness, and I doubt anyone on Nerfhaven mods/is experienced with the deploy. Maybe get a pair of needlenose pliers, and a light, and poke around a bit.

-Montymarks

Edited by Montymarks, 21 August 2016 - 03:47 PM.

[The2ndBluesBro]

Deploys suck, but taking it apart, cleaning then greasing the parts will probably solve this.

[DjOnslaught]

Make sure your getting a full prime on the blaster, if that doesn't fix it try What 2nd blues said

Love the deploy btw. It's only crappy because of the collapsability gimmick

Edited by DjOnslaught, 21 August 2016 - 06:44 PM.

[L0rdMosh]

 Here is a link to a helpful mod guide to the deploy by Drac. It's relatively simple and you might be able to find the cause to the problem too. It's probably caused by some plastic sticking out.

[justajolt]

Grease. 

 

Sorry to ask the obvious, but have you looked down the barrel whilst priming and dry-firing?