4 replies to this topic

[Stryfe Man]

I was wondering is there anyway to disassemble the modulous stealth upgrade kit barrel? There are no screws or tabs that are obvious to me. Has anyone had any luck?

Edited by Stryfe Man, 01 July 2016 - 12:41 PM.

[JohnB]

It's most likely solvent-welded shut. I believe that you should be able to undo it by letting it sit in hot water for a bit, but you might wanna check that first. I'll get back to you after a bit of looking.

 

Edit: https://m.youtube.co...h?v=NXD7q1ryeJo

 

0:35. If this doesn't work then I don't know. Why do you need to take it apart anyways?

Edited by JohnB, 07 July 2016 - 11:14 AM.

[Stryfe Man]

I was hoping on taking out the inner barrel and making it shorter

[Stryfe Man]

I was wondering if any one had any luck disassembling the stealth upgrade kit barrel. I was hoping to take out the inner barrel and shorten the length of the whole attachment.

 

 

It appears to be solvent welded and I was wondering if anyone has tried boiling it.

 

I MERGED YOUR TWO THREADS BECAUSE WHY WOULD YOU START A NEW THREAD TO ASK THE EXACT SAME THING YOU ASKED ALREADY.

Edited by Ice Nine, 26 July 2016 - 12:30 PM.

[The2ndBluesBro]

Just saw as much off the front as you want and take the piece you've sawn off and cut it down to just the front cover plate and glue it back on. Taking it apart will be a huge hassle. Boiling it would be your only real option and if that fails you're out if luck.