6 replies to this topic

[samtoosong]

i have watched M.T.S video on the super stryfe mod: 

 

however i wonder if i could use different motors and a different lipo 

 

lipo: https://www.amazon.c...=A2K5T7VJD3NOG0

 

motors: https://www.amazon.c...d=A50DZI580G3JX

 

[xXD3V1LXx]

You can use a different lipo but not the motors those are not 130 sizemotors.

[SWNerf]

Just be prepared in case those motors are a little to long. even if there are its not a super big deal, you'll just have to carve out the shell  to fit them. 

[samtoosong]

would these work?
 
https://www.amazon.c...ords=130 motors

 

https://www.amazon.c...30 motors 50000

[Quack]

would these work?
 
https://www.amazon.c...ords=130 motors

 

https://www.amazon.c...s=130 motors 50

These look fast enough, however I don't think their built for that much torque.

[nerfsamurai]

You have to select your motors first before selecting a battery. MTB motors are freaking great. They make a 6 volt one now called a Honeybadger as well as the HellCat which is an 180 size and needs shell modification. Your lipo will be based off the current draw from your motors as well as its voltage draw. The Honeybadger and 180 need a 2S but very different currents. I would also recommend 2000 mah minimum.

[DjOnslaught]

The 130 rhinos also run off a 2s, for 180s you need a 3smaller to get enough umph to make it worth the work installing, or at least imho