retaliator mod
#1
Posted 08 June 2016 - 12:00 AM
When the things in life that give pause mean nothing, time becomes your friend.
#2
Posted 08 June 2016 - 05:17 AM
*plugs in mod guide*
uh I've seen people use rulers but you need to only use a stock spring. I would try to go for scrap metal.
I'm Van, the weird kid with a box
Triggered as fuck and ready to gun you down
#NoBarrelTapsNoMercy
#GoFastGoFurious
"Stone Cold Operator of Death" -Clownie
#3
Posted 08 June 2016 - 11:02 AM
I screwed a piece of scrap aluminum on the top of the slide (1/2" long coarse-thread/sheet metal #8's) and screwed a piece of 1-1/2" PVC to that with a wooden spacer. 2" PVC would have been preferable, but I didn't have any. If you're using a wooden ruler it might hold up, those cheap plastic ones probably wouldn't and metal rulers are usually too thin by design.
I may need to epoxy the aluminum to the slide to get it to stay for good, even through the rail there is not a lot of room for the screws to grip the slide, but if I get a barrel I'll probably do something barrel related since that's what everyone else seems to do and it'd be less permanent. Another option I was considering was using the existing screw ports on the slide with longer screws, but the piece I had on hand wouldn't have fit.
#4
Posted 08 June 2016 - 02:12 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users