Jump to content


Photo

I Have A Question About A Splitfire Mod

concerns schedule 80 pvc

4 replies to this topic

#1 NerfinMidget

NerfinMidget

    Member

  • Members
  • 14 posts

Posted 05 August 2004 - 05:15 PM

I was wondering whether or not to use schedule 80 pvc in my splitfire?

I was plannng on brassing it but i would have to get it off the internet and it would cost me alot more.

I was also wondering what the exact measurements of schedule 80 pvc is ( id , od) ?

thanks
-nm
  • 0

#2 CustomSnake202

CustomSnake202

    Member

  • Members
  • 506 posts

Posted 05 August 2004 - 05:35 PM

SCH 80 has an inter diameter of 1/2 inch and the outer diameter is 13/16, just over 3/4 of an inch. What kind of darts are you going to use? Have you tried your local ace hardware or hobby shop?
  • 0

#3 NerfinMidget

NerfinMidget

    Member

  • Members
  • 14 posts

Posted 05 August 2004 - 06:04 PM

Thank you for the diameters, I will be using stefans ( micros ) , i have checked all my local hobby shops and they do not have brass , except for one store that has reall weird hours. Is using schedule 80 ok for my splitfire ( well in general pump powered blasters)?
  • 0

#4 CustomSnake202

CustomSnake202

    Member

  • Members
  • 506 posts

Posted 07 August 2004 - 01:43 AM

I would take one of your stefans with you and see how it fits SCH 80. If it's a good fit, definately get it. And if it doesn't, try to get some of that 9/16 brass from that one store. I'm sorry I didn't respond to this earlier; didn't mean to leave you hanging.
  • 0

#5 NerfinMidget

NerfinMidget

    Member

  • Members
  • 14 posts

Posted 07 August 2004 - 03:01 PM

Thank you for your help i ended up getting 9/16 brass and it works great!

-nm
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users