Jump to content


Photo

Hyperfire First look and easy mod guide


11 replies to this topic

#1 Zombona

Zombona

    Member

  • Members
  • 56 posts

Posted 23 April 2016 - 03:26 PM

Hey everyone. I got a Hyperfire yesterday and posted a few pics around of it. I thought I would share here so you guys could see it as well.

 

Here is the overview with clip comparisons.

http://imgur.com/a/jfDhd

63k5hyW.jpg

 

Here is the rewire guide and 2S lipo firing demo.

http://imgur.com/a/q95GF

SCppBZS.jpg


  • 0

#2 xXD3V1LXx

xXD3V1LXx

    Member

  • Members
  • 258 posts

Posted 23 April 2016 - 04:00 PM

Thank you for the internal pictures they help a lot. This is very interesting how it works. I love the way the lock for the jam door works.


Edited by xXD3V1LXx, 23 April 2016 - 04:02 PM.

  • 0
A quote from Ice Nine
"Use the golden rule: Don't be a dick."

NERF On
-Devil

#3 DjOnslaught

DjOnslaught

    Member

  • Members
  • 350 posts

Posted 23 April 2016 - 08:31 PM

That's awesome. Love the canted flywheel cage
  • 0

#4 jwasko

jwasko

    PowerBeard

  • Moderators
  • 1,021 posts

Posted 23 April 2016 - 09:51 PM

Thanks for cross-posting. 

 

Do you notice increased accuracy compared to your average flywheel blaster, given the canted flywheels?

 

Do the conveyor cleats seem to push the darts (i.e. catch the back of them), or do they more drag the darts along via friction? If it's friction do you think that the "pusher" would work with a thicker belt with consistent ridges (like so) rather than one with 2 or 3 cleats? I ask because I saw some people concerned that the belt might wear.


  • 0

-Jwasko, STILL Sole Surviving member of Steel City Nerf and Sober Sister of the Sex Dwarves
We NERF ON all day, and FUCK OFF all night


#5 Epsilon

Epsilon

    Member

  • Members
  • 4 posts

Posted 23 April 2016 - 10:03 PM

 

jwasko said:

I saw some people concerned that the belt might wear.

Yes, but is is possible that under the rubber, they reinforced the belt similar to this? If they didn't, could you place a small sheet of polycarbonate to either reinforce or replace the cleat?


  • 0
I'll try, but only in the future will we find out.

#6 TheOrk

TheOrk

    Member

  • Members
  • 24 posts

Posted 24 April 2016 - 04:44 AM

Thank you for that detailed view! I had a difficult time to find any information at all because of the "other" Hyperfire

So this is basically a flywheelblaster (it sounded a lot more quiet in those first toy fair videos) with a feeding belt instead of a pusher? should be easy to tune :-D

What does that fancy resistor setup do at the flywheel cage?


  • 0

#7 davidr

davidr

    Member

  • Members
  • 4 posts

Posted 25 April 2016 - 06:26 AM

that looks pretty cool, can it only use the drum mags or can it use the standard mags?

thanks


  • 0

#8 The2ndBluesBro

The2ndBluesBro

    Member

  • Members
  • 576 posts

Posted 25 April 2016 - 07:40 AM

that looks pretty cool, can it only use the drum mags or can it use the standard mags?
thanks

All mags work fine.
  • 0

Nerf, Gaming, knives: https://www.youtube....FjcObRZTl2KReDQ

 


#9 Zombona

Zombona

    Member

  • Members
  • 56 posts

Posted 25 April 2016 - 09:21 AM

I wasn't checking for accuracy since the fps isn't high enough to cause Koosh darts to have inconsistent flight paths. I know chanted wheels on the snikkas cage add accuracy.
I think the belt works by both. There are two or three ridges in the belt. The rubber grips the dart while the small ridge pushes it along. I don't think that this. Belt will easily wear down. It seemed like great rubber.
  • 0

#10 DjOnslaught

DjOnslaught

    Member

  • Members
  • 350 posts

Posted 26 April 2016 - 11:28 AM

Very interesting. Wonder when they will become purchasable in stores.
  • 0

#11 NewVega

NewVega

    Member

  • Members
  • 3 posts

Posted 12 May 2016 - 01:28 AM

Make Test Battle On youtube did a review on the canted flywheel setup and it works for slower FPS ratings. Higher the rating got the more the spin of the dart made it spiral off track. Looks to be a potential failed attempt at accurate darts. Better understanding as these get an official release.


  • 0

#12 DjOnslaught

DjOnslaught

    Member

  • Members
  • 350 posts

Posted 12 May 2016 - 04:44 AM

Lord Draconial has posted a full compliment of videos on the Hyperfire and wow can it turn into a serious dart hose.
  • -1


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users