Jump to content


Photo

Oznerfnerd Longshot kit

longshot mods oznerfnerd

7 replies to this topic

#1 jsharma17

jsharma17

    Member

  • Members
  • 14 posts
  • Country:United States

Posted 02 April 2016 - 09:00 PM

Hi everyone,

 

I was wondering if I should know anything before ordering the oznerfnerd kit. If anyone can make a small review, someone can list pros and cons, if it is worth the money, etc. 

 

Thanks,

 

- jsharma17


  • 0

Can I make orduh for pickahp pls?


#2 Cartaya

Cartaya

    Member

  • Members
  • 112 posts

Posted 02 April 2016 - 09:05 PM

I would like to see a review on it too. Many of my friends who use it overseas are over the moon about it.


  • 0

....Fear of a Nerf Planet!


#3 skullface44

skullface44

    Member

  • Members
  • 186 posts
  • NerfHaven Subscription Supporter
  • State:Ontario
  • Country:Canada

Posted 03 April 2016 - 12:08 AM

Personally I like it, its a good addition to a OMW kit , artifact kit or a brass breach. 

 

pros:

-very nice 3d printing quality

- the metal reinforcement peaces make the stock parts very strong when glued properly 

- dead space reduction peace is a nice clean alternative to using hot glue 

- very nice 14kg spring with ground ends (best on the market in my opinion) 

-plunger reinforcement centres  the spring and really supports the weak part of the plunger rod 

- the lube it comes with is very good 

 

Cons:

- you must use very strong epoxy to glue the bolt sled reinforcement parts. super glue will not work, jb weld broke on me, lepage epoxy broke as well, the only one that worked was aroldite and i had to import it from australia 

- the bolts that are ment to go though the plunger cap (micky mouse peace) are a pain to get on and the nuts did not fit unless i bent the bolt quite a bit. The bent bolt would not go though the screw ports unless i used alot of force. 

- its expensive to ship from Australia to canada or the US 


  • 0

#4 jsharma17

jsharma17

    Member

  • Members
  • 14 posts
  • Country:United States

Posted 03 April 2016 - 06:58 PM

Personally I like it, its a good addition to a OMW kit , artifact kit or a brass breach. 

 

pros:

-very nice 3d printing quality

- the metal reinforcement peaces make the stock parts very strong when glued properly 

- dead space reduction peace is a nice clean alternative to using hot glue 

- very nice 14kg spring with ground ends (best on the market in my opinion) 

-plunger reinforcement centres  the spring and really supports the weak part of the plunger rod 

- the lube it comes with is very good 

 

Cons:

- you must use very strong epoxy to glue the bolt sled reinforcement parts. super glue will not work, jb weld broke on me, lepage epoxy broke as well, the only one that worked was aroldite and i had to import it from australia 

- the bolts that are ment to go though the plunger cap (micky mouse peace) are a pain to get on and the nuts did not fit unless i bent the bolt quite a bit. The bent bolt would not go though the screw ports unless i used alot of force. 

- its expensive to ship from Australia to canada or the US 

What should I get then OMW, Artifact, or Oznerfnerd?


  • 0

Can I make orduh for pickahp pls?


#5 The2ndBluesBro

The2ndBluesBro

    Member

  • Members
  • 576 posts
  • Location:Toronto
  • State:Ontario
  • Country:Canada
  • MKC on Youtube

Posted 03 April 2016 - 07:13 PM

What should I get then OMW, Artifact, or Oznerfnerd?


Get artifact and oznerfnerd they work well together.
  • 0

Nerf, Gaming, knives: https://www.youtube....FjcObRZTl2KReDQ

 


#6 skullface44

skullface44

    Member

  • Members
  • 186 posts
  • NerfHaven Subscription Supporter
  • State:Ontario
  • Country:Canada

Posted 03 April 2016 - 07:17 PM

What should I get then OMW, Artifact, or Oznerfnerd?

well if you have to just pick one I would get the artifact kit. But if you have the money to get a few kits I would get all three. the big hammer kit seems cool too 


Edited by skullface44, 03 April 2016 - 07:17 PM.

  • 0

#7 jsharma17

jsharma17

    Member

  • Members
  • 14 posts
  • Country:United States

Posted 04 April 2016 - 06:38 PM

well if you have to just pick one I would get the artifact kit. But if you have the money to get a few kits I would get all three. the big hammer kit seems cool too 

What's the fps with the artifact kit. Bc using the stage 2 OMW kit with the oznerfnerd kit means you don't have use the metal brackets and it shoots ~130 fps.


  • 0

Can I make orduh for pickahp pls?


#8 The2ndBluesBro

The2ndBluesBro

    Member

  • Members
  • 576 posts
  • Location:Toronto
  • State:Ontario
  • Country:Canada
  • MKC on Youtube

Posted 05 April 2016 - 12:26 PM

What's the fps with the artifact kit. Bc using the stage 2 OMW kit with the oznerfnerd kit means you don't have use the metal brackets and it shoots ~130 fps.


FPS is linked to the spring you have in it and is therefore variable. 200+ is achievable though. Always use the metal brackets. They add structural integrity for no cost and I've heard of the OMW sled breaking at very high (18kg+?) spring loads without them.
  • 0

Nerf, Gaming, knives: https://www.youtube....FjcObRZTl2KReDQ

 




Also tagged with one or more of these keywords: longshot, mods, oznerfnerd

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users