Stampede internals question
Posted 06 February 2016 - 08:46 PM
I recently purchased a stampede off ebay as working.... it's a completely unworking gut for rebuild gun.. if it's metal it's rusted, if it is metal and moves (including most springs) it's seized up (hence the motor and switch inquiry since they are unreadable)...
Gonna be a interesting project for sure since I intend to do a stockade integration along with select fire and a few other things.
Thanks in advance for the help.
Posted 06 February 2016 - 09:18 PM
The size of motor is 360. A 380 or 390 motor could also work since they are the same diameter, but I think they are longer so you may have to do some modification.
In particular, it is an RS360PH-3560. They were also used in orange-trigger swarmfires (the motor was downgraded for the blue-trigger ones). Or, you could try finding/buying a similar motor online.
The Zeus also has two 360-3160 motors if you are willing to buy and tear into one of those.
The switch shouldn't be anything that special, although placement is critical or else your blaster may not stop firing (although if you are adding select fire and whatnot maybe you will be controlling that in a much better way than the stock method?) Maybe try using one of the safety switches? It looks like it is a SPDT switch, though so make sure you use one of those I guess.
-Jwasko, STILL Sole Surviving member of Steel City Nerf and Sober Sister of the Sex Dwarves
We NERF ON all day, and FUCK OFF all night
Posted 06 February 2016 - 09:25 PM
Posted 07 February 2016 - 12:01 AM
Ahh it is a 360, thought so.
The plastic gears that do the retracting and gearing of the motor seem like they might not last if the motor gets sped up with a few extra volts, are there any upgrade gear sets etc available anywhere?
Or, could look at replacing the mechanism altogether with a stepper, or RC servo.
Posted 07 February 2016 - 08:16 AM
Have you filed a dispute to get your money back? The item was not as described.
I'm keeping the gun, if it dispute it he might want it back, and right now it's in pieces in my work area.
Posted 07 February 2016 - 08:20 AM
Once I get a new motor (couldn't find one on ebay or amazon) and get that segment working, I'm gonna rewire in 14ga wire rework the batter compartment to hold the arduino, and the actual batteries which will like be 9v batteries
Posted 09 February 2016 - 11:38 AM
Posted 09 February 2016 - 09:00 PM
I'll br cracking my Stampede open this week pending upgrade work. Got a full colour 1.5" OLED prepped for it already, so will see how that motor mechanism works.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users