8 replies to this topic

[Pineapplepies]

How can I rebuild my Deploy CS-6? I modded it but can't rebuild it. I alredy searched and can't find anything. I have get out all pieces like in here. I need a step by step instruction, but a video would be perfect. Can someone please help me?

How did you mod it, spring mod, or did you take everything out like the picture? Along with that, why did you want to mod a deploy in the first place?!?!

[jboynerf345]

A picture you can find online should be sufficient. Sometimes a modification tutorial, especially in video format, can be helpful too. Even if the mechanics in the Deploy are a bit more difficult then most blasters, it is pretty easy to figure out.

Just my opinion, stop wasting you're time on the Deploy, but it is your decision I guess.

[Maniacal Coyote]

Melt it down and mold it into something halfway decent.

[Brimstone Omega]

Hmmm...just checked the Mods Directory and there really isn't a write-up....In a perverse kind of way that really does make sense. I bought one of those things back in the day when it came out figuring it would be a fun little gimmicky thing with the intention of painting it up as like a Mass Effect type cosplay do-hickey. Loaded a mag or two and laughed at myself for even considering the notion. now it sits in one of the many forlorn blaster bins in my Land of Misfit Toys, because, lets face it, that's where those things belong. I find the LSFG to be more useful. I think I used the thing once as a flashlight when my Maglight ran out of Ds.

Alright, enough Deploy bashing, couldn't help myself. I suppose I could finally crack that bastard open and do a write-up on it (*cringe*), but I'm at the lovely old FNG status for now, it would be a few days prolly before I could do the thing. If (and that's a really big IF) you really need the help I can do that, but I'd rather not have to touch that thing again. I could do a video too, I suppose, not really up on the video stuff, but I do have a you tube account...

The moral of this story:

That, my friend is why you always want to take a few pics of you blaster in various states of undress, sometimes it helps to know where all the pieces go back.

Edited by Brimstone Omega, 22 October 2015 - 10:27 PM.

[jboynerf345]

Could you Please do a write up or something like that?

Honestly, a good writeup requires a lot of time and effort. Frankly, barely anyone currently owns a Deploy, uses it, or even cares about it. Someone making a modification or repair guide about a Deploy, especially in the time we're in, isn't feasible.

Edited by jboynerf345, 24 October 2015 - 07:19 PM.

[Vim Fuego]

My first mod was on a Deploy, mostly because it was my least favourite blaster and one I figured I wouldn't miss if it went tits-up. It also happens to have one of the most complicated mechanisms of any blaster I've modded so far.

Unfortunately, there isn't a lot of help out there for you either. The Youtube video I used had some guy claiming he'd done it multiple times, but had to stop filming every once in a while to 'figure something out' before coming back and bending,grinding and generally forcing everything back together.

This one is better: Nerf Deploy CS-6 Internals Guide! - but it doesn't go into a huge amount of detail... Best advice I can give: You don't need to force anything into place. Nerf blasters are so well engineered that every piece has its place and will only fit there one way. You'll know if you're doing it right when everything just falls into place.