4 replies to this topic

[Bayonet M8]

So I searched around and couldn't find anything about this. Some dude on Reddit told me there would be problems. I didn't understand what he meant so if someone could tell me what would happen, it would be nice.

Edited by Bayonet M8, 09 October 2015 - 06:33 PM.

[Snoop Doggy doge]

Koosh darts and an RSCB don't sound very good. The little heads and rubber catches on to everything and it putting it on an RSCB, the way it functions it could be hard to get the Koosh to sit properly in the barrel. I recommend using slugs and a hopper,

[tomorrowsDarkness]

Adding on to this; anything in an RSCB that doesn't have a hard tip or thin enough tip will get stuck trying to enter your barrel, at least in my experience. Stock darts, koosh, some slugs if the heads aren't on properly, all have issues feeding into RSCB's. As Snoop said, your best bet is slugs. And well made ones, or you're gonna have a bad time.

[father time]

The reason that Kooshes don't work well in RSCBs, is because the tentacles fold back and cause too much drag on the dart

[Pineapplepies]

So I searched around and couldn't find anything about this. Some dude on Reddit told me there would be problems. I didn't understand what he meant so if someone could tell me what would happen, it would be nice.

You could always cut down elite darts, since I belive the rubber tips would feed well, but correct me if I am wrong please.

Edited by Pineapplepies, 15 October 2015 - 01:07 PM.