6 replies to this topic

[Echoblammo]

If you have read it, I made a post a while back on the Triad, and thanks to your help, my problems are now fully resolved with that weapon, now moving on to 2 Bigger Primaries, the Raider CS-35 and Longshot CS-6

Raider:
The Raider, a perfect Slam-Fire High-Cap Weapon, If It'd ever shoot the darts! I Like to use the 6-Dart Mags with t sometimes for Mobility in battle and ease of Reloading, but when I do, the Bullets get jammed frequently. I only use 6 darts a mag (Even though you can fit 7, DON'T DO THIS FYI jams are frequent) and when I do put in 6, they always get jammed. The bullets are in Mint condition, no Fraying or holes. If I Only put 1 or 2 darts in the mag it'll shoot well over 60ft, but it jams at top capacity, can anyone help?

Longshot:
Another Fine weapon, my problem with this one though is that the Bullets will not shoot AT ALL. Every 12 or so shots Ill get 1 bullet out at Modest speed and range, but not as good as it should. It doesn't jam either, I cock the weapon with relative Ease, and when I fire nothing but Air comes from the Barrel. I'll take the mag out, and inside the Tube, the bullet is there! I can cock and shoot all day but that sucker won't come out, forcing me to remove it manually. Can anyone help with this one? I really love the gun but fear I have to get rid of it since its taking up space.

Any solution helps, mods or repairs.

[every7]

You say your darts are "Mint." Are they unused? Even if there is no visible wear and tear, the foam gets softer with use and time. Just like your triad problem, this may be a bad seal because of soft foam.

[vaan]

Sounds like the follower spring or follower on the clip you're using for the raider is the problem. On the longshot, I have no idea.

[The2ndBluesBro]

Try modding the longshot (ARs etc. , basically really standard stuff). If that doesn't fix it you can always get some other internals from someone on NerfHaven and replace them.

[Borgador]

The raider will jam frequently, especially during slam fire, if you rack the slide handle too fast. The slide must be fully drawn back and fully exteneded. I have had tons of jams with mine, even darts folded in half inside the breach, because of racking the slide too fast/not fully and firmly forward and back.
I modded mine with the Orange Mod Works raider polycarb kit, and upgrade springs. It broke.
I moved on the the elite version of the raider (I can't think of it's name right now), and the elite alpha trooper. Both are much better blasters stock than a modded raider.

[Astech]

I moved on the the elite version of the raider (I can't think of it's name right now)

You're thinking of the rampage.
[Edit, hadn't seen the more recent topic by Echoblammo.]

Edited by Astech, 01 September 2015 - 02:32 AM.

[SkullBunny]

Have you done any mods to your longshot? Because if so you may want to make sure your dart tooth is still functioning because that is how the dart is pushed to disengage the AR. If your dart tooth is fine, hit me up with some pictures and I'll see if I can help further.