Jump to content


Photo

ZLIN Dart

Made dart any tima any where, simple, Unplugged!
homemade stefan dart variant writeup

4 replies to this topic

#1 3DBBQ

3DBBQ

    Member

  • Members
  • 214 posts

Posted 20 July 2015 - 12:42 AM

*
POPULAR

Hello every one!
This is a new way to make darts
Made dart any tima any where, simple, Unplugged!
This is what I made zlin tool, there is a free 3D model download.
PgDNZO0h.png

HERE: http://www.jspb3d.com/free-models.html

Currently the use of rubber,Resistance is relatively large, lightweight
Correction result FFKM O-Ring ,Heavier, more smooth.

VIDEO,Cut foam Fast:


By the way, This is my Recent Work:
eijXC5Uh.jpg

o7LurJ9h.jpg


Partially used 3d printing
System: air compressor
Clip: inline clip
load darts: 11 ~ 12mm

RAGE:
Angle [Average]:
zlin dart = 68.9 feet
Stefans = 88.2 feet
Nerf N-Strike Elite Universal Suction = 92.1 feet
N-STRIKE ELITE = 110.24 feet

thank you for your time!


Edited by Aeromech, 23 November 2015 - 12:59 AM.

  • 1

#2 Natrium

Natrium

    Member

  • FNG1 
  • 1 posts

Posted 20 July 2015 - 04:07 PM

Have you experienced any issues with the o-rings slipping off of the dart or moving around on the foam?
  • 0

#3 3DBBQ

3DBBQ

    Member

  • Members
  • 214 posts

Posted 21 July 2015 - 02:25 AM

Have you experienced any issues with the o-rings slipping off of the dart or moving around on the foam?

Avoid loose O-RING must select a smaller O-RING.
FFKM O-Ring heavier, the results were better, but there will be loose issues.
A better solution is mixed, use the top general O-Ring, the other using a FFKM O-Ring.
  • 0

#4 KoRnEd

KoRnEd

    Member

  • Members
  • 209 posts

Posted 22 July 2015 - 04:05 AM

I'm currently in Taiwan for an internship. Is there any way to see one of these in action?
  • 0

20:07 tiredKitty living in NYC, you could spend a lot of time in Chinatown and only speak the mother tongue
20:07 tiredKitty Not a good idea, btw.

I have identified the problem: "maverick"


#5 3DBBQ

3DBBQ

    Member

  • Members
  • 214 posts

Posted 24 July 2015 - 02:15 AM

I'm currently in Taiwan for an internship. Is there any way to see one of these in action?


August there will be events in Taichung , not yet but
activities still writing,maybe wargame or target shooting,
Please join facebook fan page,and message me :)
Any active i will contact you!
  • 0



Also tagged with one or more of these keywords: homemade, stefan, dart, variant, writeup

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users