15 replies to this topic

[OceanSkais]

I was wondering if anyone had ever tried this before, and if so then I`d like to show my version of it. I`m not sure how to post pictures (noob) but I would like to know how many (if any) people would like a write up for it before I go spend hours of my time on one.

[OceanSkais]

Nvm I figured out how heres some pics

Heres the blaster itself


Here`s a topview


And here`s how the breech closes


I`ll have some internal pics up in a bit

Edited by OceanSkais, 01 July 2015 - 11:12 AM.

[Astech]

And here`s how the breech closes

From what I can see so far, this is a great setup. The only problem I can think of is if older darts get caught on the thick walled breech, causing jams. Otherwise, I'll have to try this myself. Well done.

[OceanSkais]

Thanks,
The older darts tend to work better for me, since the cpvc i use has a very tight fit on them. This is the first model though, once i find myself some magic pvc i will make it more air tight, but i still have yet to come upon it.

[Astech]

once i find myself some magic pvc i will make it more air tight, but i still have yet to come upon it.

Since you're in the US, brass tubing is an option for you. In Australia I've yet to find any at a reasonable price, but I understand McMaster Carr online has some great deals. A little bit of 'Haven searching will find you the correct sizes for a perfect seal. "Magic PVC" might just be the "clear" type, but you'd have to check with a vernier or other fine measuring tool to make sure the I.D. and O.D. are right. Clear PVC has significantly different dimensions to regular or CPVC.

[OceanSkais]

Good to know

[popatachi]

cpvc longshots. They are pretty fun to make. Sodizzle made one a long while back and I had done some work on what he had done.

Sodizzle's write up
http://nerfhaven.com...=1

My first attempt
http://nerfhaven.com...=1

My second attempt
http://nerfhaven.com...=1

Good job on your build.

[OceanSkais]

cpvc longshots. They are pretty fun to make. Sodizzle made one a long while back and I had done some work on what he had done.

Sodizzle's write up
http://nerfhaven.com...=1

My first attempt
http://nerfhaven.com...=1

My second attempt
http://nerfhaven.com...=1

Good job on your build.

Wow, I wish I had found that before I made mine. I made mine to be able to fire elites and for that it works well. Mine has a terrible seal from pipe to pipe but it still hits great ranges

[popatachi]

As long as it works, it's a good build. The elites might help plug the seal, so to speak. If you're able to, try a different method to seal the two pipes if you want to tinker with it. But either way, good job.

[OceanSkais]

As long as it works, it's a good build. The elites might help plug the seal, so to speak. If you're able to, try a different method to seal the two pipes if you want to tinker with it. But either way, good job.

I will, thanks

[zack0909]

A soddizle breached long shot. Following one of papatachi's write up. It uses Stefan modded clips

[OceanSkais]

While using stefan clips would ensure an airtight seal, the purpose for mine was to make on that could shoot elites or streamlines. It does have a bad seal but it still hits great ranges.

[zack0909]

Ok. I have never heard of one shooting elites. Very nice

[OceanSkais]

Ok. I have never heard of one shooting elites. Very nice

Thanks

[Condorboy]

I would love to see a write-up on this.

[OceanSkais]

I would love to see a write-up on this.

I'Ll get started on it asap