Jump to content


Photo

The Mississauga Massacre


53 replies to this topic

#1 skullface44

skullface44

    Member

  • Members
  • 190 posts

Posted 15 June 2015 - 12:22 PM

Location: Erindale Park 1695 Dundas St W Mississauga, ON L5L 1C6 Canada I have a permit for section A 10:00am - 6:00

When: August 15th, I will be at the park at 9:30AM to set up but the war starts at 10:00 AM.

What to bring:
- One or more good primary blasters as well as a secondary blaster. If your blaster brakes I will most likely be able let you use one of mine
- A springer pistol for pistol rounds
- As many darts as you see fit, I am bringing 500 for my self as well as what ever is in my dart bin for anyone that did not bring enough darts
- Water, there will not be any places to get water close to the field so please bring your own. I will be bringing a cooler with a case of water in it for my self and any idiots that forget to bring some
- A good mood, no one wants to war with a jerk. If you are causing problems with other players I will ask you to leave
- Bring a lunch, there will not be anywhere to go eat that is close by. The park has a few BBQs, if one is available I would pitch on a box of burgers or something if anyone else wants any
- Eye protection. Your eyes are pretty much the only part of your body that can be seriously hurt by a nerf dart, I really would like to see everyone with some kind of eye protection but I wont make you if you don't want to.

What not to bring:
- Water guns
- Alcohol or drugs, I would be the first to want to go get a beer with everyone (that is legal) after the war but the park is not place for that. We will get kicked out if people see that.
- Homemade airguns
- singled titans

Blaster restrictions:
- This will mostly be done on a case by case basis, if you are not sure about a blaster show it to me.If you would not want to be shot with your own blaster there is a good chance no one else wants to be shot with it either.

Darts:
- #6 or #8 slugs as well as 3/0 or lighter glue domes will be aloud. If your darts are made so poorly that they are unsafe I will not let you use them, you are more then welcome to use some of mine though.
- No exposed metal or slingshot weighted darts
- Silicone domes and x darts are fine too

Who will be there:
- Me + 3
- Condorboy +1
- The2ndbluesbro +1-2(maybe)
- Buffdaddy
- cheyner (maybe)
- charlie156 (maybe)
- Lpat +1 or 2 (maybe)

I know I already posted this but I though I would put it up here so no one will miss it. The park will cost $87-$100ish for the day for 120 people. I know we wont have that many so there will be no problems with that. I told the lady pretty much what we were doing and she seemed to not care. My pay pal address is danny931202@gmail.com, I am going to pay for the rental and what ever money you guys can pitch in would be grate.

Edited by skullface44, 22 July 2015 - 04:52 PM.

  • 0

#2 Buffdaddy

Buffdaddy

    Do not buy from this member

  • DO NOT TRADE
  • 824 posts

Posted 15 June 2015 - 09:35 PM

Sorry I didn't get back to you earlier. I have the date marked!
  • 0

#3 cheyner

cheyner

    Member

  • Members
  • 240 posts

Posted 15 June 2015 - 10:06 PM

I'm a maybe.
Do you have a permit?
How firm are you on slingshot darts?
  • 0

Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.


Canadian Nerfers-R.I.P.

#4 skullface44

skullface44

    Member

  • Members
  • 190 posts

Posted 15 June 2015 - 10:19 PM

I'm a maybe.
Do you have a permit?
How firm are you on slingshot darts?


I was looking into that and apparently we don't need one unless there is 20 people. I would buy one if I knew people would come and pitch in to help cover the cost but since this is the first war in a long time im worried about spending bunch of money to get a permit and loosing it all because not enough people show up. If there is a good turn out and we can turn this into a regular thing I would be more then happy to get a permit or rent out a airsoft place. Wost case we get kicked out of the park we can just move to another location, I know of a few other good spots close by.

No sling shot darts man, they are just dangerous. Getting shot with those out of pretty much any airgun or homemade is not fun. I think I can speak for most people when I say no one whats to be shot with slingshot darts.
  • 0

#5 skullface44

skullface44

    Member

  • Members
  • 190 posts

Posted 15 June 2015 - 10:23 PM

Sorry I didn't get back to you earlier. I have the date marked!


Grate,see you then !
  • 0

#6 The2ndBluesBro

The2ndBluesBro

    Member

  • Members
  • 576 posts

Posted 15 June 2015 - 10:28 PM

Can't wait to try out my +bow!
  • 0

Nerf, Gaming, knives: https://www.youtube....FjcObRZTl2KReDQ

 


#7 Buffdaddy

Buffdaddy

    Do not buy from this member

  • DO NOT TRADE
  • 824 posts

Posted 16 June 2015 - 07:21 AM

Haha, you do realize Canuckstan ran slingshot darts for the longest time, right? So the old guys probably have those in stock.

Totally understand moving away from those, and you're hosting so it's your call. But since it's the first war in forever, it might be good to be lenient about them. A transition type deal. Although if someone shows up with lots of fresh slingshot darts, we reserve the right to use them on the offender with a Big Blast :P

3/16'' bearings work perfectly. Since McMaster doesn't do Canada I could bring some up if needed.

How much are the permits?
  • 0

#8 Curly

Curly

    Member

  • Members
  • 201 posts

Posted 16 June 2015 - 12:36 PM

Absolutely. I'll have to get the day off work but I'll sell a kidney to Nerf again. If the permits aren't hilariously expensive it's a good idea. Enough of us can Paypal you the money in advance to cover most of the cost. I have plenty of loaner blasters, and a few NIB UMBs if needed. I need foam, barrel material, and your motorcycle.

Haha, you do realize Canuckstan ran slingshot darts for the longest time, right? So the old guys probably have those in stock.

Totally understand moving away from those, and you're hosting so it's your call. But since it's the first war in forever, it might be good to be lenient about them. A transition type deal. Although if someone shows up with lots of fresh slingshot darts, we reserve the right to use them on the offender with a Big Blast :P

3/16'' bearings work perfectly. Since McMaster doesn't do Canada I could bring some up if needed.

How much are the permits?


I actually do have a large amount of slingshot weights... are those still the state of the art in Canuck dartsmithing? I just emailed McMaster and they said they ship to Canadian businesses, but weren't specific on what type of business. I'll see what they say if I try to ship stuff to work and let everybody know. I wouldn't be upset if I couldn't use my slingshot darts, but the next cheap alternative I'm aware of is copper BBs which are hard to center. Slugs should be faster to make if you don't have to carefully make a glue dome, if they're not double the cost I'll switch to those permanently. If McMaster checks out anybody at an independent business should be able to get McMaster goodies.

Edited by Curly, 16 June 2015 - 01:18 PM.

  • 0

#9 skullface44

skullface44

    Member

  • Members
  • 190 posts

Posted 16 June 2015 - 07:34 PM

Haha, you do realize Canuckstan ran slingshot darts for the longest time, right? So the old guys probably have those in stock.

Totally understand moving away from those, and you're hosting so it's your call. But since it's the first war in forever, it might be good to be lenient about them. A transition type deal. Although if someone shows up with lots of fresh slingshot darts, we reserve the right to use them on the offender with a Big Blast :P

3/16'' bearings work perfectly. Since McMaster doesn't do Canada I could bring some up if needed.

How much are the permits?


You have a point, I will although sling shot darts for this war but we need to start to get rid of them if we continue to do this. Definitely no fresh ones. 3/16 ball bearings are great, iv been using those for a wile and I love them. If everyone used those that would be perfect but most people in Canada cant get stuff from mc master. 3/0s should be fine for everyone, thank your for the generous offer though


Absolutely. I'll have to get the day off work but I'll sell a kidney to Nerf again. If the permits aren't hilariously expensive it's a good idea. Enough of us can Paypal you the money in advance to cover most of the cost. I have plenty of loaner blasters, and a few NIB UMBs if needed. I need foam, barrel material, and your motorcycle.




I actually do have a large amount of slingshot weights... are those still the state of the art in Canuck dartsmithing? I just emailed McMaster and they said they ship to Canadian businesses, but weren't specific on what type of business. I'll see what they say if I try to ship stuff to work and let everybody know. I wouldn't be upset if I couldn't use my slingshot darts, but the next cheap alternative I'm aware of is copper BBs which are hard to center. Slugs should be faster to make if you don't have to carefully make a glue dome, if they're not double the cost I'll switch to those permanently. If McMaster checks out anybody at an independent business should be able to get McMaster goodies.


Grate idea, ill look into in tomorrow morning and post how much it will cost as soon as I find out even if I can get a few people to pitch and I end up paying the most I am totally fine with that.


I don't think the care what type of business, my family owns a small construction business and I have had no trouble ordering stuff from mc master. Switching to slugs would be cheaper I think, #6 washers can be bought locally and the felt pads are around $5usd for 500.

Edited by skullface44, 16 June 2015 - 07:35 PM.

  • 0

#10 Curly

Curly

    Member

  • Members
  • 201 posts

Posted 16 June 2015 - 08:03 PM

I don't think the care what type of business, my family owns a small construction business and I have had no trouble ordering stuff from mc master. Switching to slugs would be cheaper I think, #6 washers can be bought locally and the felt pads are around $5usd for 500.

If the fees for import and shipping are significant I'd like to do a group buy. I'd buy materials for around 3000 darts, so I might not have to get more next time. Plus I could rope a couple people into coming, and support other people that need gear.

Where's the foam and their respective barrels at?
  • 0

#11 Buffdaddy

Buffdaddy

    Do not buy from this member

  • DO NOT TRADE
  • 824 posts

Posted 16 June 2015 - 08:25 PM

Where's the foam and their respective barrels at?


Where the white women at? :lol:
  • 0

#12 cheyner

cheyner

    Member

  • Members
  • 240 posts

Posted 16 June 2015 - 10:32 PM

Check out Canadian Nerfers on facebook. Most of us Ontario nerfers are on there including all the old guys from the GTA. I posted a link last night and this war is building a lot of interest, might pass that 20 person mark with this one.
The relaxing of the darts helps a lot. I have several hundred that are a few years old that have just been sitting there itching to fly.
Are Cobras firing large ammo ok?
  • 0

Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.


Canadian Nerfers-R.I.P.

#13 Buffdaddy

Buffdaddy

    Do not buy from this member

  • DO NOT TRADE
  • 824 posts

Posted 17 June 2015 - 07:30 AM

Unofficially speaking, that should be ok. Who doesn't like lobbing mongo darts at people? Even with a drain blaster, mongos can only go so fast. Provided you don't fire point blank.

BTW, if we are certain about getting mass quantities from mcmaster, the distribution center is literally on my way there to Canada. Only shipping would be pitching in a couple bucks for the gas tank.

WILL CALL FTW
  • 0

#14 skullface44

skullface44

    Member

  • Members
  • 190 posts

Posted 17 June 2015 - 11:40 AM

As long as it does not look like paintball gun or a real gun Its all good.

I just called about renting the park. It will be $87-$100 to rent the park all day. I am willing to put up all of the money as long as people pitch in what they can. My pay pal address is danny931202@gmail.com send what ever you feel like giving. A minimum of $5 cnd would be grate. Any local guys that want to give me cash when they see me at the war or ti buy foam let me know. The sooner I rent the park the better.

For anyone that needs foam, I have been selling hot rod xl and Sera rod beige. If you want to go straight to the source Bernardi building supply in Mississauga carry hot rod xl. It's fat foam but can be stretched to fit cpvc and 17/32 brass. I have the auto blanker so anyone that wants pre cut blacks of stretched hot rod xl let me know. The Sera rod is springer fit in 17/32 and cpvc. Airgun fit in petg, it is slightly flat on one side but 15 minuets in the dryer takes care of that.

Edited by skullface44, 17 June 2015 - 03:15 PM.

  • 0

#15 Curly

Curly

    Member

  • Members
  • 201 posts

Posted 17 June 2015 - 04:15 PM

I just called about renting the park. It will be $87-$100 to rent the park all day. I am willing to put up all of the money as long as people pitch in what they can. My pay pal address is danny931202@gmail.com send what ever you feel like giving. A minimum of $5 cnd would be grate. Any local guys that want to give me cash when they see me at the war or ti buy foam let me know. The sooner I rent the park the better.


Do it. Even if I can't get the day off I'll make sure you break even on the permit and other expenses (within reason).
  • 0

#16 skullface44

skullface44

    Member

  • Members
  • 190 posts

Posted 17 June 2015 - 04:46 PM

Do it. Even if I can't get the day off I'll make sure you break even on the permit and other expenses (within reason).


Okay, I will be booking it tomorrow. The office is closed now
  • 0

#17 cheyner

cheyner

    Member

  • Members
  • 240 posts

Posted 17 June 2015 - 05:47 PM

A permit will go a long way to get more vets. Many of us are still bitter about being kicked out of the park Vengeance used to be held at.
Also, if the permit allows sticking things in the ground I have many obstacles I can bring and would really like to pass onto somebody else after the war.

Edited by cheyner, 17 June 2015 - 05:49 PM.

  • 0

Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.


Canadian Nerfers-R.I.P.

#18 skullface44

skullface44

    Member

  • Members
  • 190 posts

Posted 17 June 2015 - 09:47 PM

A permit will go a long way to get more vets. Many of us are still bitter about being kicked out of the park Vengeance used to be held at.
Also, if the permit allows sticking things in the ground I have many obstacles I can bring and would really like to pass onto somebody else after the war.


That would be grate, I will tomorrow after I get the permit. If for some resin we get kicked out of the park (very very unlikely) I have a back up spot that is close by, it is a industrial lot that no one really goes to. I don't know who owns it but I have talked to every one that backs onto it and they don't care what I do there. I used to play airsoft there with my friends when I was in high school with loud full auto AEGs and GBBs, no one ever came or said anything. So no matter what we are having a war, the relocation spot is 5 mins away at most. If I am the only one with a car I will make as many trips as I need to to get everyone from one spot to another if I have to.
  • 0

#19 skullface44

skullface44

    Member

  • Members
  • 190 posts

Posted 18 June 2015 - 03:15 PM

No turning back now, I just payed for the permit, it was $106. We have section A from 10 to 6, this section has a BBQ so we can cook up a nice lunch. Please don't make me regret this guys, if we have a good turn out and I don't have to eat the inter cost of the permit I will be doing this as regular as possible. Anyone that wishes to help out with the cost please send money to danny931202@gmail.com via paypal.

Edited by skullface44, 18 June 2015 - 03:17 PM.

  • 0

#20 The2ndBluesBro

The2ndBluesBro

    Member

  • Members
  • 576 posts

Posted 19 June 2015 - 03:21 PM

I may be bringing a +1 or 2 (strong maybe for the +1, not so sure on the +2)
  • 0

Nerf, Gaming, knives: https://www.youtube....FjcObRZTl2KReDQ

 


#21 Condorboy

Condorboy

    Member

  • Members
  • 30 posts

Posted 20 June 2015 - 09:41 AM

I'll be willing to pitch in to cover a possible permit!
  • 0

'Cause I'm a straight up gangster, I know that stuff.


#22 charlie156

charlie156

    Member

  • Members
  • 89 posts

Posted 21 June 2015 - 06:06 AM

put me down for a maybe
  • 0

#23 skullface44

skullface44

    Member

  • Members
  • 190 posts

Posted 22 June 2015 - 02:11 PM

I may be bringing a +1 or 2 (strong maybe for the +1, not so sure on the +2)


Okay, sounds good. I will bring lots of extra blasters for people

I'll be willing to pitch in to cover a possible permit!


Great, thanks!

put me down for a maybe


Okay, will do




I spent about 3 hours last Saturday walking through the park. The area I rented had a lot of people in it so I didn't go in but the rest of the park has lots of great spots to play if we get bored of our spot. I will be going back to the park this week to take a closer look at the spot I rented though.
  • 0

#24 charlie156

charlie156

    Member

  • Members
  • 89 posts

Posted 22 June 2015 - 02:30 PM

I'll see if I can talk the and only MIG into coming :)
  • 0

#25 The2ndBluesBro

The2ndBluesBro

    Member

  • Members
  • 576 posts

Posted 22 June 2015 - 03:23 PM

Is there anyone in the Toronto area I can carpool with to get to the war? I'm in the midtown area but I would be fine with going to any subway station to meet up on the way.
  • 0

Nerf, Gaming, knives: https://www.youtube....FjcObRZTl2KReDQ

 



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users