how did this guy here mod his sm1500 to shoot homemade stefan megas without replacing his stock barrels? I've tried to do the same, but I don't know exactly how....
Sm1500 Help
Started by TOFUburger, Jul 27 2004 01:14 AM
5 replies to this topic
#1
Posted 27 July 2004 - 01:14 AM
All bow down to BoltSniper, he is my god.
#2
Posted 27 July 2004 - 02:14 AM
It's because Commando is just that 1337.
Well, the SM1500 originally took the 5/8" green Larami darts, so 5/8" FBR should fit fine too. You may need to take out the restrictors, or make some holes in the back of your foam so it fits in there. Good luck.
Well, the SM1500 originally took the 5/8" green Larami darts, so 5/8" FBR should fit fine too. You may need to take out the restrictors, or make some holes in the back of your foam so it fits in there. Good luck.
"The 'dance goes on..."
#3
Posted 27 July 2004 - 11:30 PM
what are the restrictors and how do you take them out?
All bow down to BoltSniper, he is my god.
#4
Posted 27 July 2004 - 11:42 PM
Actually, you wouldn't have to take them out. Just push the dart back far enough to push the restrictors back.
#5
Posted 27 July 2004 - 11:47 PM
so will this work only with homemade stefan megas WITH holes? because I just want to be able to shoot homemade stefan megas WITHOUT holes, and also without having to change the barrels.
All bow down to BoltSniper, he is my god.
#6
Posted 28 July 2004 - 10:58 AM
Well then you're going to have to knock the barrels off and remove the pegs and restrictors. I guess you can put the barrels back on afterwards if you're that much opposed to PVC.
<meta name="cxwq" content="mostly water">
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users