#1
Posted 20 March 2015 - 10:54 AM
#2
Posted 20 March 2015 - 02:31 PM
It will chrono in the low 90's
I bought it secondhand. Is it worth $25? Meh.
#3
Posted 20 March 2015 - 02:40 PM
#4
Posted 20 March 2015 - 03:51 PM
Some Rampages (later production models, maybe?) require the use of a small white cap that is included in the kit. I couldn't get it to fit, so I couldn't use the new plunger rod or catch. I just stuck with the new mainspring and catch spring. I haven't had any problems yet, so I would recommend just buying one of their springs and catch springs by themselves.
Hmm, I haven't bought the rampage for it yet... The sonic ice one should have the piece I'm guessing since its newer... I will probably get that and a kit, I'm not sure.
#5
Posted 22 March 2015 - 12:20 AM
Hmm, I haven't bought the rampage for it yet... The sonic ice one should have the piece I'm guessing since its newer... I will probably get that and a kit, I'm not sure.
Here is the piece in question.
I have this kit and it's a decent kit. The piece mentioned above addresses some variances in shell designs. It's part of the OMW kit not the blaster. It fits in the plunger rod head to fix the gap issue and help with priming. On my blaster I had to do some fine tuning as priming was a complete SOB. I had to fill a bit of the plunger rod with hot glue to resolve the priming issue. I also went ahead and remove the AR system.
If you haven't spent the money for the blaster and the kit, I'd suggest getting the Retaliator and OMW Stage 1 & 2. Better performing blaster in my opinion.
However, now that I think of it, this would be a good angel breech candidate....hmmmm...
Edited by racer188, 22 March 2015 - 12:24 AM.
#6
Posted 22 March 2015 - 08:56 PM
#7
Posted 23 March 2015 - 11:35 AM
EDIT: yes, I name my blasters.... got a problem with that?
Edited by Gin, 23 March 2015 - 11:44 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users