Jump to content


Photo

OMW Rampage kit??

worth it?

6 replies to this topic

#1 mudkipforever

mudkipforever

    Member

  • Members
  • 27 posts

Posted 20 March 2015 - 10:54 AM

So I have been looking at the Orange mod works kit for the rampage but I haven't found many reveiws. Does anyone know if it's worth the $25? Does anyone have it?? Thanks!
  • 0

#2 Duke Wintermaul

Duke Wintermaul

    Member

  • Members
  • 516 posts

Posted 20 March 2015 - 02:31 PM

I have it.

It will chrono in the low 90's

I bought it secondhand. Is it worth $25? Meh.
  • 0

#3 Capt Apollo

Capt Apollo

    Member

  • Members
  • 2 posts

Posted 20 March 2015 - 02:40 PM

Some Rampages (later production models, maybe?) require the use of a small white cap that is included in the kit. I couldn't get it to fit, so I couldn't use the new plunger rod or catch. I just stuck with the new mainspring and catch spring. I haven't had any problems yet, so I would recommend just buying one of their springs and catch springs by themselves.
  • 0

#4 mudkipforever

mudkipforever

    Member

  • Members
  • 27 posts

Posted 20 March 2015 - 03:51 PM

Some Rampages (later production models, maybe?) require the use of a small white cap that is included in the kit. I couldn't get it to fit, so I couldn't use the new plunger rod or catch. I just stuck with the new mainspring and catch spring. I haven't had any problems yet, so I would recommend just buying one of their springs and catch springs by themselves.


Hmm, I haven't bought the rampage for it yet... The sonic ice one should have the piece I'm guessing since its newer... I will probably get that and a kit, I'm not sure.
  • 0

#5 racer188

racer188

    Member

  • Members
  • 63 posts

Posted 22 March 2015 - 12:20 AM

Hmm, I haven't bought the rampage for it yet... The sonic ice one should have the piece I'm guessing since its newer... I will probably get that and a kit, I'm not sure.


Here is the piece in question.
Posted Image

I have this kit and it's a decent kit. The piece mentioned above addresses some variances in shell designs. It's part of the OMW kit not the blaster. It fits in the plunger rod head to fix the gap issue and help with priming. On my blaster I had to do some fine tuning as priming was a complete SOB. I had to fill a bit of the plunger rod with hot glue to resolve the priming issue. I also went ahead and remove the AR system.

If you haven't spent the money for the blaster and the kit, I'd suggest getting the Retaliator and OMW Stage 1 & 2. Better performing blaster in my opinion.

However, now that I think of it, this would be a good angel breech candidate....hmmmm...

Edited by racer188, 22 March 2015 - 12:24 AM.

  • 0

#6 mudkipforever

mudkipforever

    Member

  • Members
  • 27 posts

Posted 22 March 2015 - 08:56 PM

I've thought about angel breeching one as well, but I don't think I'm quite ready XD, would love to see a write up of one though. As far as the retaliatory, I have had one for a while and don't care for it mainly because the priming method stinks and no slam fire. I had a raider a while back and loved it hence the reason I want the rampage and kit.
  • 0

#7 Gin

Gin

    Member

  • Members
  • 78 posts

Posted 23 March 2015 - 11:35 AM

I have this kit and it is installed in my "belle" and I find it performs wonderfully, and as far as the white plunger cap I got mine to fit fine. It may not give as high of performance as some might want but it is worth the money in my opinion..... Plus that metal trigger though!!!!!!!!!

EDIT: yes, I name my blasters.... got a problem with that?

Edited by Gin, 23 March 2015 - 11:44 AM.

  • 0
Leader of the Wrecking Crew, Student of Ninjitsu and Kendo, Avid Otaku, Metal head, Amateur engineer, and In my spare time I kill zombies. I'll sleep when I'm dead... 'Till then, There ain't no rest for the Wicked.


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users