9 replies to this topic

[Sthefrog]

I need a link to a tank that will work with the mag strike. A connector would be nice to. thanks


sthefrog

[Draconis]

'Sthefrog', on 24 Feb 2015 - 9:38 PM, said:

I need a link to a tank that will work with the mag strike. A connector would be nice to. thanks


sthefrog

The tank I would recommend is entirely determined by how you are planning to use it.

[Sthefrog]

I don't plan on using it for big wars.

[Bro Juice]

Then what do you plan on using it for? Depending on the gametype, the tank could range in sizes. For example, if you are playing a relatively short game, you won't need a huge tank. On the other hand, if you are using it for HVZ and you don't want to fill it up very often you will need a very big tank (like this).

[Zombona]

'Sthefrog', on 24 Feb 2015 - 9:38 PM, said:

I need a link to a tank that will work with the mag strike. A connector would be nice to. thanks

I made this tank for my Rapid Madness but it would work the same for you.
I don't know what kind of fittings you need for the Magstrike so that's for you to find out.

[Sthefrog]

thanks Zombona. i plan on using it for short games

[Zombona]

'Sthefrog', on 25 Feb 2015 - 1:44 PM, said:

thanks Zombona. i plan on using it for short games

I don't have all the kinks worked out in the system but I know the bladder holds air at least. It increased the capacity of the RM by several magnitudes. Without setting the OPV off it nommed multiple 40rd clips.

I think a small external air tank would work for you. You might still have to pump during a game but you can go much longer without. This would allow a more maintenance pumping/pumping at your leisure.

This is the tubing I purchased for the homemade bladder.
You'll obviously need 3/4'' barbed fittings and clamps for this tube. I got mine from my local hardwood store.

For the smaller barbed fittings (3/16'' and smaller) my store was very lacking so I purchased what I needed from this seller.

Pnevmo

Edited by Zombona, 25 February 2015 - 11:30 AM.

[Draconis]

'Zombona', on 25 Feb 2015 - 4:29 PM, said:

It increased the capacity of the RM by several magnitudes.

This would imply that filling the tank once should fire darts on the order of 40,000 units, as each "magnitude" increase is equal to multiplying the current number by ten.

[Sthefrog]

'Zombona', on 25 Feb 2015 - 4:29 PM, said:

I don't have all the kinks worked out in the system but I know the bladder holds air at least. It increased the capacity of the RM by several magnitudes. Without setting the OPV off it nommed multiple 40rd clips.

I think a small external air tank would work for you. You might still have to pump during a game but you can go much longer without. This would allow a more maintenance pumping/pumping at your leisure.

This is the tubing I purchased for the homemade bladder.
You'll obviously need 3/4'' barbed fittings and clamps for this tube. I got mine from my local hardwood store.

For the smaller barbed fittings (3/16'' and smaller) my store was very lacking so I purchased what I needed from this seller.

Pnevmo

Do you know where i can get that thin clear tubing.

Edited by Sthefrog, 25 February 2015 - 05:40 PM.

[Zombona]

'Draconis', on 25 Feb 2015 - 6:06 PM, said:

This would imply that filling the tank once should fire darts on the order of 40,000 units, as each "magnitude" increase is equal to multiplying the current number by ten.

Uh fine lol. It increased it enough that I can dump at least two 40rd clips.

As for the clear tubing.

You can find that at your local hardware store or order it online. The tubing in the Rapid Madness is 3/16'' I can't speak for the Magstrike.