Range Master Probelms
Posted 21 December 2014 - 05:44 PM
Also, when I put a barrel onto the blaster and fire it, I only get a very silent pop and the dart goes about 5 feet. Before modding it, the blaster would actually get further ranges than the modded version, which was about 40 feet or so. If anyone could help, it'll be great. Thanks for reading.
Posted 21 December 2014 - 08:55 PM
What modifications did you do to the blaster itself, thats how we can start to see why your ranges are so bad.
Posted 21 December 2014 - 09:18 PM
EDIT: The air leaking out of the firing pin is A LOT. It isn't just like a small pop, it seems like half of the air capacity is going out of the firing pin area.
Edited by XCS2, 21 December 2014 - 09:26 PM.
Posted 21 December 2014 - 10:06 PM
Unfortunately, if the problem doesn't lie with the barrel, then you may have disrupted the valve. I cut a rangemaster tank open before, and I really don't see what you could screw up, as long as none of the plastic is stuck in the tank. However, keep in mind that the rangemaster has an internal hammer setup that rapidly depresses the firing pin. If you are testing the tank outside of the gun, that may also be the issue.
Posted 21 December 2014 - 11:00 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users