i am looking for someone with a lot of experience modding the 3B.
I would like to make this gun my primary and maximize and squeeze as much range as possible from the 3B.
Links to relevant threads would be appreciated.
Looking For 3B Modding Expert
Started by pwr1, Dec 12 2014 01:38 AM
3 replies to this topic
#1
Posted 12 December 2014 - 01:38 AM
#2
Posted 12 December 2014 - 05:41 PM
i am looking for someone with a lot of experience modding the 3B.
I would like to make this gun my primary and maximize and squeeze as much range as possible from the 3B.
Links to relevant threads would be appreciated.
Lots of mods can be found in the modification section of the forums, check out the modifications directory. My recommendation is to coupler it, then do the draw extinction from the link I posted then integrate a tank of some kind ( I used a at2k tank) onto the front grip and then put your pump on top. tank is fired with a key ring. That is how I did mine, I also did another one with the same mods plus a big salvo tank in each of the arrow holders, those are fired via a blast button close to the trigger of the bbb. Hope that helps
http://nerfhaven.com...showtopic=25537
http://nerfhaven.com...showtopic=22415
There is a lot of mods for the bob, just look around.
#3
Posted 13 December 2014 - 10:00 PM
PM sent
#4
Posted 14 December 2014 - 11:00 AM
I believe that this is the full potential that can be squeezed out of the BBB. http://nerfhaven.com...showtopic=18706
I truly Doubt that it can get any better than that.
I truly Doubt that it can get any better than that.
Holy shit it's Captain Slug.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users