Edited by Snoop Doggy doge, 02 December 2014 - 04:01 PM.
Mech Engineering Colleges
#1
Posted 02 December 2014 - 10:17 AM
I'm Van, the weird kid with a box
Triggered as fuck and ready to gun you down
#NoBarrelTapsNoMercy
#GoFastGoFurious
"Stone Cold Operator of Death" -Clownie
#2 Guest_TheSilverhead_*
Posted 02 December 2014 - 01:09 PM
#3
Posted 02 December 2014 - 01:38 PM
A side note - you won't be working with tools as a mechanical engineer (for the most part). You'll be doing lots of CAD and math, but generally very little on the manufacturing side of things. The people who work with tools generally get paid less (especially when they're just starting out) and have significantly lower educational requirements for their jobs (not saying they're stupid, just that they went a different route - typically a voc. tech. program at a community college or tradeschool). It's important to know how things are made if you're going to be designing things to be made, but a lot of schools (RPI included) seem to gloss over that. If you learn these things on your own and can demonstrate your knowledge through extracurriculars and personal projects, you'll be a much more attractive candidate for internships, co-ops, and actual jobs. Hasbro wants me to go on co-op with them for a semester once I fix my GPA - they want a project manager for the 2016 Nerf line (and they really like hiring RPI students, apparently).
Youtube
LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/
#4
Posted 02 December 2014 - 03:28 PM
#5
Posted 02 December 2014 - 04:04 PM
I'm Van, the weird kid with a box
Triggered as fuck and ready to gun you down
#NoBarrelTapsNoMercy
#GoFastGoFurious
"Stone Cold Operator of Death" -Clownie
#6
Posted 02 December 2014 - 07:17 PM
#7
Posted 02 December 2014 - 08:48 PM
Roboman, whats it like in troy, I'm trying to decide if I should apply to RPI or not. I heard its a dangerous area, what are your thoughts?
Like most places, it's dangerous if you're out alone at night in bad areas and make yourself look like a target. If you stay around campus or downtown, it's fine. I've never had any issues (though there's usually a mugging or two each year, but that kind of a thing can happen pretty much anywhere). North Troy can be kinda sketchy, but there's really no reason for you to be over there unless you live there (it's entirely residential). Here's an album of some of my pictures of a few parts of campus and a little bit of downtown. I like to walk around downtown and shoot pictures every now and then, and I've never felt unsafe. There's not a huge amount of stuff to do off-campus, but there are plenty of events at RPI to keep you busy. I'm active in the Photo Club and Archery Club, and I usually go out to frat parties on the weekends.
You should apply, visit, and see if it's a place you want to go to. It wasn't my first choice, and I honestly didn't intend to go here when I was going through the application process, but they gave me a free application and waived the essay requirement, so I said fuck it, applied, and wound up going (showed up on the first day of orientation on my own without ever having set foot on campus, too). After 3 semesters, I don't think I'd be happier anywhere else.
Youtube
LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/
#8
Posted 03 December 2014 - 06:19 PM
...and I usually go out to frat parties on the weekends.
It is nice to see that Lambda Lambda Lambda is hosting more events.
ON TOPIC: I'll be attending Oregon Tech next year, excellent engineering program. Historically picked clean by Intel, Xerox/Tektronix, HP, and Microsoft. The other alternative is Oregon State University, which is a more diverse program, but costs more. OSU also hosts an HvZ game every term.
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?
#9
Posted 04 December 2014 - 01:33 AM
industrial designer
#10
Posted 04 December 2014 - 10:07 AM
I haven't bothered to check out the HvZ scene here because of academics but I know it does exist and is pretty active.
#11
Posted 04 December 2014 - 07:24 PM
Hasbro wants me to go on co-op with them for a semester once I fix my GPA - they want a project manager for the 2016 Nerf line (and they really like hiring RPI students, apparently).
If you get in, would you be so kind as to give sneak peaks? Lol, just messin' with ya'. XD
#12
Posted 05 December 2014 - 07:20 PM
I'm Van, the weird kid with a box
Triggered as fuck and ready to gun you down
#NoBarrelTapsNoMercy
#GoFastGoFurious
"Stone Cold Operator of Death" -Clownie
#13
Posted 05 December 2014 - 07:43 PM
@Roboman, I do not mean to be intruding, but how good do you believe your job is, and are all peers graduating with a job? Also a comparison of GPA from HS and GPA now? (if you do not wish to answer than do not) Also, is there HVZ? Kinda looking forward to keep nerf close in college.
I don't have the job yet, it'll more likely be next year. Co-ops pay very well. I want the co-op position at Hasbro because I want the work experience in an engineering field, and it's a huge bonus that it happens to be in an area directly related to one of my hobbies. I don't plan on working for Hasbro after college, because I'd much rather start my own company, and I've been slowly building up to that over the past couple years.
Here's the annual report for the C/O 2013 regarding employment and plans after graduation. I'd like to note that if you can't get hired after graduating, the school will hire you (at least from what I've been told), though some people don't want to go that route. If your GPA is above a 3.0 (sometimes 2.5, depending on the company), you're going to be able to get a job if you want one. Engineering companies know about RPI, and they know that in general, we produce competent engineers. HS GPA was 3.86 (unweighted; my school didn't weight grades). Current GPA is...significantly less than that.
We have an HvZ group. I usually go to at least one of their events each semester, but they have stuff pretty much every weekend, weather permitting, and a multiday game each semester. I have run singled pumpbows and 2Ks at their events with elite darts and they were fine with it as long as I wasn't being a dick.
Youtube
LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/
#14
Posted 07 December 2014 - 07:47 PM
Man keep finger on trigger receive painful finger bang!
Olde School Tacticool
All hail #YOLOStock!
I have taken a "break" from the hobby, but if you have anything crazy hit me up. I'm always interested in a challenge. Currently designing a nerf vehicle among other things.
#15
Posted 16 December 2014 - 10:19 AM
I'm Van, the weird kid with a box
Triggered as fuck and ready to gun you down
#NoBarrelTapsNoMercy
#GoFastGoFurious
"Stone Cold Operator of Death" -Clownie
#16
Posted 19 December 2014 - 08:31 PM
#17
Posted 20 December 2014 - 12:07 PM
At UD they have mechanical engineers complete design projects every spring. The course load is heavy with a lot of dry math and science courses, so they do this to add some hands-on experience to the major.
They also have what's called a 4+1 plan in which you earn both a bachelor's and master's degree in 5 years.
It's kinda expensive if you're coming from out of state, though you might do well with financial aid and scholarships.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users