4 replies to this topic

[Number 1 nerf nut]

Hi NumberOneNerfNut here. So I've fixed the seal on my maverick and put in a ace #122(I think) spring for the trigger cut to length, it fires good for the first few shots, and then I have to pull the trigger fast, other wise, the seal on the gun won't match up on the barrel/turret
Thanks for any advise
Keep nerfing

[SolarFusion]

Hi NumberOneNerfNut here. So I've fixed the seal on my maverick and put in a ace #122(I think) spring for the trigger cut to length, it fires good for the first few shots, and then I have to pull the trigger fast, other wise, the seal on the gun won't match up on the barrel/turret
Thanks for any advise
Keep nerfing

It sounds like you have too much friction in between the turret and seal. I'd try lubing it up or using a smaller o-ring.

[Number 1 nerf nut]

Thanks solarfusion I never thought of lubing the seal between the turret

Edited by Number 1 nerf nut, 26 November 2014 - 05:18 PM.

[Number 1 nerf nut]

I lubed the back of the turret where the seal slides by and it works great now, thanks

[SolarFusion]

I lubed the back of the turret where the seal slides by and it works great now, thanks

You're welcome, glad it's working for you!