tools/materials needed
small phillips scewdriver
flat head screwdriver (optional)
glue gun or epoxy
e-tape and/or rubber bands
This is a fairly simple mod , with no cutting and just a little glueing required.
Okay lets get started
Step 1. Take off the Secret Strike shell with the small phillips screwdriver
Step2.(Ignore if you have already modded or don't want to mod your Secret Strike)
See those four little prong stick things, bash them out with your flat head screw driver
and the dart post should fall right out
Step3. Now on to the Retaliator barrel
All we're going to do to the barrel is take the orange piece on the bottom rail
To do this, the barrel needs to be taken apart, here's a picture of the barrel with the screws locations pointed out
Step4. Last step
Attach the Secret Strike to your retaliator with rubber bands and/or e-tape
Now put some hot glue or epoxy on the areas you can reach, and let it harden/cure
Once that has hardened/cured, take off the rubber bands/e-tape, and glue the rest of the Secret Strike onto the barrel with your glue gun/epoxy
Let the hot glue/epoxy, harden/cure
And your done!
Here's the finished product on my retaliator
Edited by Number 1 nerf nut, 08 January 2015 - 05:15 PM.