3 replies to this topic

[AMATHE821]

So earlier today, I was modifying my rampage, and then I attached it to a retaliator barrel, which I then attached to my rapidstrike. I noticed that after I primed the blaster, the charging handle would slide freely, and would have to physically held in the full forward position in order to fire. I am also noticing a significant range drop. The only modifications made were AR removal and I cut that tooth off on the breech. Does anyone know how to fix it?

Help is much appreciated.

[Duke Wintermaul]

It sounds exactly like a boltsled lock problem, but you say you cut what tooth off the breech? If it's what I'm thinking then it should not interferer with the boldsled. Unless it's a botched job.

Any internal pictures?

Also, there's a small tooth lock in the back of the plunger-carrier that is only secured via shell friction and is often lost by new modders.

[grenadegreg]

You might have misplaced/lost a piece. I would recommend looking a picture of an open blaster and comparing it to yours. Hope this helps.

[AMATHE821]

Thanks for the help everyone. I figured out that I had lost that white lock on the left side of the shell near the magwell when I originally completely disassembled it.

-AMATHE821