6 replies to this topic

[Nerfgirl36]

I'm modifying my superMAXX 1500 and cannot get the turrett apart. I cannot get the spring rest assembly part out. I've pryed at it all afternoon and so has my dad. Any helpful tips?

[Drev]

Have you tried twisting it? That always works for me.

[shmmee]

I've heard of people using boiling water to soften the glue. That warps and destroyed mine though.

[azrael]

I use a pair of pliers as a lever. Try to only ever disassemble it once, repeated times will fuck the whole dealie up.

[Nerfgirl36]

I have tried using pliers, sticking it quickly in boiling water, and twisting it without any luck. Im not a weakie either. Not sure what to try now.

[archangel24]

Use a punch, most effective way to remove it, use a 1/8"/3mm punch and it should get the job done. Let the back cap of the turret to sit in hot water for a bit first to help and prevent cracking the plastic.

Edited by archangel24, 03 July 2014 - 02:15 PM.

[TheNerfingFlamingo]

Dremel (if you don't need it in the future)