Jump to content


Photo

titian barrel size


15 replies to this topic

#1 Droid31

Droid31

    Member

  • Members
  • 266 posts

Posted 09 June 2014 - 10:47 PM

im sorry if this is in the wrong section


i need to know the outer diameter of a titian barrel or pvc that is or is close to the same diameter as the stock barrel
  • 0

#2 Mully

Mully

    Member

  • Members
  • 342 posts

Posted 09 June 2014 - 11:11 PM

1-1/4" PVC pipe has almost the exact same OD (outside diameter) as a Titan barrel, it's just a tiny bit bigger.

Edited by Mully, 09 June 2014 - 11:12 PM.

  • 0
S.C.U.N.

#3 Droid31

Droid31

    Member

  • Members
  • 266 posts

Posted 09 June 2014 - 11:27 PM

1-1/4" PVC pipe has almost the exact same OD (outside diameter) as a Titan barrel, it's just a tiny bit bigger.


thanks
  • 0

#4 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts

Posted 11 June 2014 - 12:07 AM

Not close enough to fire rockets from, though.
  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#5 Droid31

Droid31

    Member

  • Members
  • 266 posts

Posted 11 June 2014 - 12:53 PM

Not close enough to fire rockets from, though.

what do you mean?
  • 0

#6 Thorn

Thorn

    Member

  • Members
  • 91 posts

Posted 11 June 2014 - 01:01 PM

what do you mean?

I'm pretty sure what Draconis is saying is that because the titan's stock barrel is already relatively tight on the missiles, 1 1/4 inch PVC is too wide to be able to fit the rockets. Although I personally don't have a titan barrel to measure with, I'm relatively sure you could find something on Mcmaster to fit the missiles. If not, I'm sure people have extra titan barrels that they would be willing to sell you.

Edited by Thorn, 11 June 2014 - 01:01 PM.

  • 0

#7 Droid31

Droid31

    Member

  • Members
  • 266 posts

Posted 11 June 2014 - 07:08 PM

I'm pretty sure what Draconis is saying is that because the titan's stock barrel is already relatively tight on the missiles, 1 1/4 inch PVC is too wide to be able to fit the rockets. Although I personally don't have a titan barrel to measure with, I'm relatively sure you could find something on Mcmaster to fit the missiles. If not, I'm sure people have extra titan barrels that they would be willing to sell you.


well im makeing missels for somebody, but i dont have a titan, so i got some foam that fits snug on 1 1/4 pvc do you think it will work?
  • 0

#8 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts

Posted 11 June 2014 - 07:52 PM

I'm pretty sure what Draconis is saying is that because the titan's stock barrel is already relatively tight on the missiles, 1 1/4 inch PVC is too wide to be able to fit the rockets. Although I personally don't have a titan barrel to measure with, I'm relatively sure you could find something on Mcmaster to fit the missiles. If not, I'm sure people have extra titan barrels that they would be willing to sell you.



Exactly. Titan barrels are 40mm, or 1.56". 1-1/4" pipe is 1.625". It is close, but not enough to fire the rockets from. I have Titan barrels if you want one, but I have yet to find any pipe or tube on McMaster's site that has a 40mm OD.

EDIT: Ooops, I found one. It's only $35 for a 4' tube! http://www.mcmaster....ng-pipe/=sd9rpg

Edited by Draconis, 11 June 2014 - 07:54 PM.

  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#9 Droid31

Droid31

    Member

  • Members
  • 266 posts

Posted 11 June 2014 - 08:35 PM

Exactly. Titan barrels are 40mm, or 1.56". 1-1/4" pipe is 1.625". It is close, but not enough to fire the rockets from. I have Titan barrels if you want one, but I have yet to find any pipe or tube on McMaster's site that has a 40mm OD.

EDIT: Ooops, I found one. It's only $35 for a 4' tube! http://www.mcmaster....ng-pipe/=sd9rpg



ok so my foam has a between 1.25 and 1.5 ID and a 3inch OD, will it work?
  • 0

#10 Nerf Gra

Nerf Gra

    Member

  • Members
  • 145 posts

Posted 11 June 2014 - 09:58 PM

Try one of these. Should be pretty close.

Posted Image

Edited by Nerf Gra, 11 June 2014 - 10:01 PM.

  • 0
QUOTE(VelveetaAvenger @ Dec 6 2010, 12:14 AM) View Post

Maybe there's no Mcmaster, but you could make the first coconut airtank.


#11 Droid31

Droid31

    Member

  • Members
  • 266 posts

Posted 11 June 2014 - 10:12 PM

Try one of these. Should be pretty close.

Posted Image


im not looking for a barrel, im making missels for someone and i dont have a titan
  • 0

#12 Zorns Lemma

Zorns Lemma

    Sir Scrt

  • Moderators
  • 1,277 posts

Posted 11 June 2014 - 11:04 PM

I moved your thread to the appropriate section.

Please note that capitalization is mandatory on these forums per the Code of Conduct.

Edited by Zorns Lemma, 11 June 2014 - 11:05 PM.

  • 0
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#13 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts

Posted 11 June 2014 - 11:08 PM

ok so my foam has a between 1.25 and 1.5 ID and a 3inch OD, will it work?


If the ID isn't at least 1.50", I don't see it shooting normally. I see it exploding out the side. How snug is it on 1-1/4" PVC? Do you have to force it on?
  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#14 Droid31

Droid31

    Member

  • Members
  • 266 posts

Posted 11 June 2014 - 11:42 PM

If the ID isn't at least 1.50", I don't see it shooting normally. I see it exploding out the side. How snug is it on 1-1/4" PVC? Do you have to force it on?


It takes little force on 1 1/4 pvc
  • 0

#15 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts

Posted 12 June 2014 - 12:14 AM

It takes little force on 1 1/4 pvc



It'll probably be fine, then.
  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#16 Droid31

Droid31

    Member

  • Members
  • 266 posts

Posted 12 June 2014 - 02:00 AM

It'll probably be fine, then.


Ok thanks
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users