2 replies to this topic

[nerfbetter]

Hello fellow Nerfers,
I have done this amazing mod New BBB Mod awhile ago. Not long after I decided to make this better. How you may ask well read the following and you will find out.(Follow as guided in the link provided)


The First Step
You will take your dremel/drill/thingy that cuts a slot tool and make a slot in this Plunger Rod for whatever length you need it is a lot of trial and error.


The Second Step
You will take what ever tool you used and widen and lengthen you slot as needed for you bolt slide.


The Third Step
Eliminate this Evil piece that takes away a 1/2 in of draw and all of this dead space.


Now you just put a coupler on the PT and put whatever barrel you want ,I use a Rscb.

Questions and comments and concerns that you may have.

Edit:Want to make Bolt Sled but don't know what would work well as the metal bar but the design works well.

Edited by nerfbetter, 06 May 2014 - 07:01 PM.

[Zorns Lemma]

I would advise people not to do this. Removing the fins from the 3B forces you to put a bolt through that rear section to prime the blaster.

You've effectively removed the biggest benefit of the 3B and turned it into a huge flying piece of liability.

[nerfbetter]

I would advise people not to do this. Removing the fins from the 3B forces you to put a bolt through that rear section to prime the blaster.

You've effectively removed the biggest benefit of the 3B and turned it into a huge flying piece of liability.

If you read the write up with the link connected to it in the beginning you would see why you would do this.