Stock dart diameters
Posted 05 April 2014 - 09:29 AM
To be more specific, if you look at whistlers, for example, you'll see that the head is bigger than the foam. For streamlines, the opposite is true; the minimum diameter of the head is smaller than the foam. This is the diameter I'm most interested in.
Posted 05 April 2014 - 04:53 PM
Elite foam: .515
Streamline head: .465
Streamline foam: .515
Whistler/dart tag dart head: .575
Whistler/dart tag dart foam: .515
These darts were unused prior to these measurements.
These were measured with digital calipers.
It's like a Hurricane ate a Tornado and shat out a Monsoon!!
Posted 05 April 2014 - 07:29 PM
Nerf suction cup dart—foam:
Avg=.49825 Rounding for significant figures .498
Nerf suction cup dart—head:
Avg.=.5715 Rounding for significant figures .572
Buzz Bee suction dart—foam
Avg.=.5033 Rounding for significant figures .503
Buzz Bee suction dart—head
Avg.=.59375 Rounding for significant figures .594
I'm pretty sure that none of these darts have ever been used. I measured these with digital calipers and made sure that the calipers touched but did not compress the foam or head during measuring.
Edited by DartSlinger, 05 April 2014 - 07:31 PM.
Posted 10 April 2014 - 07:23 PM
"...if you've ever suffered the effects of a fucking faggot retard overpopulation, you'll understand what devistaiting effects it can have on one's psyche." - Talio
Posted 17 April 2014 - 07:51 PM
This might be old news, maybe not, but we have this thread on different stock darts from the HvZ forum. Might be useful to be using darts from the same production run.
Didn't notice this reply. I did look through that thread before, but I don't think the subject has been discussed on NH before. Thanks for bringing this to our attention. Given torukmakto4's findings, I'd suggest anyone who posts stock dart diameters, masses, etc., also posts the tip code.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users