This isn't really a write-up but this should explain really everything you would need to know about the blaster.
Here it is unopened.
And here it is opened.
So it basically uses a breech made from an airtech 2000 pump. and it is connected directly to the plunger tube via super glue and epoxy putty as shown here.
(Sorry about that last picture being mainly about the plunger tube)
Anyways the breech itself is (as I said earlier) a 2k pump with 6 or so inches of cpvc. The 2k pump has a slot in the top for the stopper to make sure that the cpvc doesn't fly out. It also has epoxy putty guides to help hold the clip in place. as seen here.
And here.
The blaster also uses a cut down EaB spring.
Ranges:
Beige foam single daisy bb glue dome.(made by bobo) 45'
#6 washer pool noodle foam slug.42'-43'ish
Double bb pool noodle foam glue dome. 36'
Single bb pool noodle foam glue dome 42'
Streamline dart slightly worn down 36'
Elite dart also slightly worn down 41'
(Pool noodle foam darts were cut with 9/16ths brass so they have a push to twist fit in cpvc.)
Edited by CoolpantsMcgee, 31 August 2013 - 11:41 AM.