So I did a simple AR removal on my Firefly. So I put it back together and when I tried to fire it......it didn't fire. The most I can figure out is that when I pull the orange part on top to cock the blaster it doesn't engage. I have no idea what the problem is. Any help will be appreciated.
Thanks in advance.
Toodaloo chaps!
Need help with my Firefly
Started by Steampunkzombie, Aug 01 2013 01:23 PM
5 replies to this topic
#2
Mully
-
- Members
- 342 posts
Member
Posted 01 August 2013 - 01:42 PM
Pics would be a great help.
S.C.U.N.
#3
DartSlinger
-
- Members
- 222 posts
Member
Posted 01 August 2013 - 02:15 PM
Does the orange part have no tension on it when you pull it back? If so, you probably left out some metal bar that pulls the plunger back.The most I can figure out is that when I pull the orange part on top to cock the blaster it doesn't engage.
#4
Steampunkzombie
-
- Members
- 53 posts
Member
Posted 01 August 2013 - 02:34 PM
Yes it has tension.Does the orange part have no tension on it when you pull it back? If so, you probably left out some metal bar that pulls the plunger back.
#6
Steampunkzombie
-
- Members
- 53 posts
Member
Posted 01 August 2013 - 03:59 PM
I think that's the problem. Thanks!Does the gun fire, but no dart comes out? If so, you may have forgotten the spring that pushes the turret seal forwards.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
