Looking for Replacement Parts
#1
Posted 02 July 2013 - 05:02 PM
My Googlefu has revealed nothing on the open market.
#2
Posted 02 July 2013 - 05:44 PM
The bolt sled from an N-Strike Alpha Trooper will work in an Elite, if that helps any.
If your accuracy is all messed up now, I would say that's due to something else, perhaps your plunger isn't lubricated well anymore, and it's not traveling down the plunger tube straight enough. That makes a big difference for even delivery of air.
http://nerfscience.blogspot.com/
#3
Posted 02 July 2013 - 09:48 PM
Edited by LinkMT, 02 July 2013 - 09:49 PM.
#4
Posted 02 July 2013 - 10:00 PM
#5
Posted 02 July 2013 - 10:27 PM
Orange Mod Works' replacement parts are plastic, not steel. If your internals broke, then you might consider a kit from them, but a new blaster would be less expensive. As for your problem with accuracy, the Elite darts may not be able to handle the increased power without spiraling out of control. If you want accuracy in a Nerf blaster, you're going to have to use stefans.
"Our stage 2 kit replaces the original breech and bolt carrier group with our own Orange Breech, aluminum bolt sled, and plunger."
Steel/aluminum, it's close enough.
@ Toast Your best bet is this forum or craigslist for replacement parts. For buzzbee blasters their customer support is excellent and will mail you replacement parts, which ones I'm not sure but I have gotten 2 big blast triggers from them.
As for accuracy you throw that out the window when you use stock darts and stock blasters. Stock clip fed blasters don't have a useful barrel, the breech itself is the barrel. Perhaps the new retaliator breech kit from OMW will help.
#6
Posted 03 July 2013 - 12:04 PM
I'll start checking out all the angles. I'm still new to modding the blasters, but it's fun as hell. I've seen some of the posts about stefans, so I'll look into that some more. I modded out my Maverick R6 (spring compression, AR, reloader) and it's still accurate within about 5 inches at about 25 feet. Of course that's a reverse plunger and suction darts, so who knows.
Anyway, I'll check out CL or around here if I still need replacement parts. Your suggestions were very helpful guys, thanks!
#7
Posted 06 July 2013 - 08:03 PM
#8
Posted 08 July 2013 - 03:21 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users