2 replies to this topic

[LinkMT]

Hello fellow beings! I figured I would make this short write up because the only other mod I saw on it was a PETG barrel replacement, which was a very respectable mod, but I wanted to try do a little bit more.

What you need:
NB-1
Adhesive of choice
E-tape
Hacksaw or Dremel.

The stock NB-1, getting about 5 feet with the stock missiles:


Firstly, cut off the front tube that you would slide your missile over (That's what she said... sorta i guess...maybe...):


Now take your CPVC coupler and stick some CPVC in the end:


Then cut it down to make it like this:


Next, take your adhesive of choice and apply it to the coupler and the snub of barrel left on your NB-1. I used goop:


Stick it on there (bet you didn't see that coming):


I then took some e-tape and folded it up and placed it under the coupler in order to prop the coupler up during the drying process:


Then I wrapped the living Jesus f*ck out of it with e-tape just to stabilize it and I was done!:


This little thing gets consistent ranges of 15-20 feet flat with slugs and a 3 in. speed loader, and has a pretty decent RoF. So yeah, thanks all!

[mangonerf]

Nice job but this is still a pretty useless blaster. You could probably get better ranges with a short barrel, and if that doesn't a good smashing is always nice

[LinkMT]

Nice job but this is still a pretty useless blaster. You could probably get better ranges with a short barrel, and if that doesn't a good smashing is always nice

Everything said in this comment was true .